Fiat 85-90 Turbo (DT) or Renault Cergos 340?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 85-90 Turbo (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Cergos 340 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Renault Cergos 340 suits loader and hydraulic implement work better on this data: 22% (9.8 L/min / 2.6 gpm) more hydraulic flow.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Fiat 85-90 Turbo (DT) and Renault Cergos 340, with the call on each
Question85-90 Turbo (DT)Cergos 340Call
Which puts more power through the PTO shaft?62.5 kW (83.8 hp)Traktorenlexikon, “Fiatagri 85-90/85-90 DT”62.6 kW (83.9 hp)Traktorenlexikon, “Renault Cergos 340”Not comparableNot comparable on power at the PTO shaft: the 85-90 Turbo (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Cergos 340 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 85-90 Turbo (DT) and the Cergos 340.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 85-90 Turbo (DT) and the Cergos 340.
Which pumps more oil for implements?44.5 L/min (11.8 gpm)Traktorenlexikon, “Fiatagri 85-90/85-90 DT”54.3 L/min (14.3 gpm)Traktorenlexikon, “Renault Cergos 340”AheadThe Renault Cergos 340 has 22% more hydraulic flow (9.8 L/min / 2.6 gpm) than the Fiat 85-90 Turbo (DT) (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?4,570 kg (10,075 lb)Traktorenlexikon, “Renault Cergos 340”No figureNo call on three-point lift: no figure on record for the 85-90 Turbo (DT).
Which is heavier, for traction?3,150 kg (6,945 lb)Traktorenlexikon, “Fiatagri 85-90/85-90 DT”4,255 kg (9,381 lb)Traktorenlexikon, “Renault Cergos 340”Ahead (a fact, not an advantage)The Renault Cergos 340 is 35% heavier (1,105 kg / 2,436 lb) than the Fiat 85-90 Turbo (DT) (both unladen weight, as stated by the source).
Which may carry more ballast and load?6,200 kg (13,669 lb)Traktorenlexikon, “Renault Cergos 340”No figureNo call on maximum permissible mass: no figure on record for the 85-90 Turbo (DT).
Which has the wider choice of gears?12 to 24Traktorenlexikon, “Fiatagri 85-90/85-90 DT”18 to 20Traktorenlexikon, “Renault Cergos 340”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 85-90 Turbo (DT) and the Cergos 340.
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Fiatagri 85-90/85-90 DT”30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Renault Cergos 340”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Fiatagri 85-90/85-90 DT”540/1000 rpmTraktorenlexikon, “Renault Cergos 340”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Fiatagri 85-90/85-90 DT”No figureNo call on PTO independence: not stated for the Cergos 340.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Fiatagri 85-90/85-90 DT”4WDTraktorenlexikon, “Renault Cergos 340”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1989–19921996–2001Ahead (a fact, not an advantage)The Renault Cergos 340 is newer: production began 7 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Renault Cergos 340 has 22% more hydraulic flow (9.8 L/min / 2.6 gpm) than the Fiat 85-90 Turbo (DT) (both pump flow, as stated by the source).
  • The Renault Cergos 340 is 35% heavier (1,105 kg / 2,436 lb) than the Fiat 85-90 Turbo (DT) (both unladen weight, as stated by the source).
  • The Renault Cergos 340 is newer: production began 7 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the 85-90 Turbo (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Cergos 340 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources