Fiat 85-90 Turbo (DT) vs Renault Ceres 95 X (A)

6 material differences · fewer than 12

Tractor one

1989–1992

No measured PTO figure

Tractor two

1994–1998

No measured PTO figure

Which should you choose?

Read our verdict on the 85-90 Turbo (DT) and the Ceres 95 X (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

6 material differences · 10 fields identical or within 5%, which is not counted as material

Fiat 85-90 Turbo (DT) and Renault Ceres 95 X (A), field by field
Field	85-90 Turbo (DT)	Ceres 95 X (A)	Gap
Engine
Engine power, claimed claimed	83.8 hp	83.9 hp	—
Engine declared	Fiat-Iveco 8045.25	JOHN DEERE 4039 TRT 35	differs
Displacement declared	3.91 L	3.92 L	—
Maximum torque declared	217 lb·ft · 294 N·m	213 lb·ft · 289 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Dry double clutch	Dry LuK double clutch type 310/330	differs
Hydraulics & hitch
Pump flow declared	11.8 gpm · 44.5 L/min	14.0 gpm · 52.9 L/min	+19% Ceres 95 X (A)
Pressure declared	3,046–3,118 psi · 210–215 bar	—	—
Three-point lift at ends declared	—	10,075 lb · 4,570 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	6,945 lb · 3,150 kg	7,617 lb · 3,455 kg	+10% Ceres 95 X (A)
Maximum permissible mass declared	—	12,644 lb · 5,735 kg	—
Wheelbase declared	92.2 in · 2,342 mm	97.2 in · 2,470 mm	+5% Ceres 95 X (A)
Length declared	159.3 in · 4,047 mm	160.9 in · 4,087 mm	—
Width declared	76.0 in · 1,930 mm	75.9 in · 1,929 mm	—
Height declared	103.0 in · 2,615 mm	100.4 in · 2,550 mm	—
Ground clearance declared	19.9 in · 505 mm	19.3 in · 490 mm	—
Turning radius, braked declared	12.0 ft · 3.65 m	12.5 ft · 3.80 m	—
Fuel tank declared	98.3 qt · 93.0 L	121.5 qt · 115.0 L	+24% Ceres 95 X (A)

Source

Source