Fiat 85-90 Turbo (DT) vs Renault Ceres 340 (A)

9 material differences · fewer than 12

Tractor one

1989–1992

No measured PTO figure

Tractor two

1998–2001

No measured PTO figure

Which should you choose?

Read our verdict on the 85-90 Turbo (DT) and the Ceres 340 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 6 fields identical or within 5%, which is not counted as material

Fiat 85-90 Turbo (DT) and Renault Ceres 340 (A), field by field
Field	85-90 Turbo (DT)	Ceres 340 (A)	Gap
Engine
Engine power, claimed claimed	83.8 hp	83.9 hp	—
Engine declared	Fiat-Iveco 8045.25	JOHN DEERE 4039 TRT 35	differs
Displacement declared	3.91 L	3.92 L	—
Maximum torque declared	217 lb·ft · 294 N·m	219 lb·ft · 297 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Dry double clutch	Dry LuK double clutch type 310/330	differs
Hydraulics & hitch
Pump flow declared	11.8 gpm · 44.5 L/min	—	—
Pressure declared	3,046–3,118 psi · 210–215 bar	—	—
Three-point lift at ends declared	—	11,486 lb · 5,210 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	6,945 lb · 3,150 kg	7,793 lb · 3,535 kg	+12% Ceres 340 (A)
Maximum permissible mass declared	—	12,644 lb · 5,735 kg	—
Wheelbase declared	92.2 in · 2,342 mm	97.2 in · 2,470 mm	+5% Ceres 340 (A)
Length declared	159.3 in · 4,047 mm	168.5 in · 4,280 mm	+6% Ceres 340 (A)
Width declared	76.0 in · 1,930 mm	83.1 in · 2,110 mm	+9% Ceres 340 (A)
Height declared	103.0 in · 2,615 mm	108.7 in · 2,760 mm	+6% Ceres 340 (A)
Ground clearance declared	19.9 in · 505 mm	19.3 in · 490 mm	—
Turning radius, braked declared	12.0 ft · 3.65 m	13.6 ft · 4.15 m	+14% Ceres 340 (A)
Fuel tank declared	98.3 qt · 93.0 L	147.9 qt · 140.0 L	+51% Ceres 340 (A)

Source

Source