Fiat 805 C vs ZETOR 8011/8045

11 material differences · fewer than 12

Tractor one

Fiat 805 C

1975–1980

No measured PTO figure

Tractor two

ZETOR 8011/8045

1968–1987

No measured PTO figure

Which should you choose?

We will not advise between these two machines, because their unladen weight differs by more than 25% (32%); the drive differs (Tracks; 2WD / 4WD); the 805 C is on tracks, not an alternative to an ordinary tractor. The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

11 material differences · 3 fields identical or within 5%, which is not counted as material

Fiat 805 C and ZETOR 8011/8045, field by field
Field	805 C	8011/8045	Gap
Engine
Engine power, claimed claimed	78.9 hp	78.9 hp	—
Engine declared	FIAT-O.M. CO 3/75 V.50	ZETOR Z-8001	differs
Displacement declared	4.56 L	4.56 L	—
Maximum torque declared	201 lb·ft · 273 N·m	196 lb·ft · 266 N·m	—
Transmission
Top speed declared	6.8 mph · 11 km/h	18.6 mph · 30 km/h	+173% 8011/8045
Hydraulics & hitch
Pump flow declared	7.3 gpm · 27.6 L/min	—	—
Pressure declared	2,843 psi · 196 bar	—	—
Three-point lift at ends declared	4,762 lb · 2,160 kg	6,680 lb · 3,030 kg	+40% 8011/8045
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	11,354 lb · 5,150 kg	8,611 lb · 3,906 kg	+32% 805 C
Wheelbase declared	72.0 in · 1,830 mm	92.8 in · 2,358 mm	+29% 8011/8045
Length declared	138.8 in · 3,525 mm	163.0 in · 4,140 mm	+17% 8011/8045
Width declared	68.9 in · 1,750 mm	77.3 in · 1,964 mm	+12% 8011/8045
Height declared	89.4 in · 2,270 mm	96.3 in · 2,445 mm	+8% 8011/8045
Ground clearance declared	13.8 in · 350 mm	12.4 in · 315 mm	+11% 805 C
Turning radius, braked declared	—	11.2 ft · 3.41 m	—
Fuel tank declared	84.5–135.3 qt · 80.0–128.0 L	95.1 qt · 90.0 L	differs

Fiat 805 C sources

Source

Source: Traktorenlexikon, “Fiat 805 C”

ZETOR 8011/8045 sources

Source

Source: Traktorenlexikon, “Zetor 8011/8045”