8 material differences · fewer than 12

Tractor oneFiat 80-R1961–1967No measured PTO figureTractor twoLamborghini R-804 (DT)1976–1982No measured PTO figure

Which should you choose?

Read our verdict on the 80-R and the R-804 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

8 material differences · 3 fields identical or within 5%, which is not counted as material

Fiat 80-R and Lamborghini R-804 (DT), field by field
Field80-RR-804 (DT)Gap
Engine
Engine power, claimed claimed82.9 hp82.9 hp—
Engine declaredFIAT 604.000LAMBORGHINI FL-1104/2differs
Displacement declared6.87 L4.56 L+51% 80-R
Maximum torque declared304 lb·ft · 412 N·m——
Transmission
Top speed declared15.5 mph · 25 km/h15.5 mph · 25 km/h—
Clutch declaredPedal operated dry single plate clutch——
Hydraulics & hitch
Pump flow declared10.6 gpm · 40.0 L/min——
Rear PTO speeds declared540 rpm540 rpm / 1000 rpmdiffers
Weight & dimensions
Unladen weight declared7,826 lb · 3,550 kg6,327 lb · 2,870 kg+24% 80-R
Wheelbase declared88.3 in · 2,242 mm89.8 in · 2,280 mm—
Length declared147.0 in · 3,734 mm131.9 in · 3,350 mm+11% 80-R
Width declared78.3 in · 1,988 mm68.5–96.1 in · 1,740–2,440 mmdiffers
Ground clearance declared17.0 in · 432 mm18.1 in · 460 mm+6% R-804 (DT)
Turning radius, braked declared13.9 ft · 4.25 m——
Fuel tank declared99.3 qt · 94.0 L63.4 qt · 60.0 L+57% 80-R

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Fiat 80-R sources

Source
  • Source: Traktorenlexikon, “Fiat 80 R”

Lamborghini R-804 (DT) sources

Source
  • Source: Traktorenlexikon, “Lamborghini R 804 DT”