8 material differences · fewer than 12

Tractor oneFiat 80-R1961–1967No measured PTO figureTractor twoJ.I. Case 9401962–1969No measured PTO figure

Which should you choose?

Read our verdict on the 80-R and the 940 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

8 material differences · 4 fields identical or within 5%, which is not counted as material

Fiat 80-R and J.I. Case 940, field by field
Field80-R940Gap
Engine
Engine power, claimed claimed82.9 hp83.0 hp—
Engine declaredFIAT 604.000——
Displacement declared6.87 L——
Maximum torque declared304 lb·ft · 412 N·m——
Transmission
Top speed declared15.5 mph · 25 km/h15.5 mph · 25 km/h—
Clutch declaredPedal operated dry single plate clutchpedal-operated dry CASE single-disc clutchdiffers
Hydraulics & hitch
Pump flow declared10.6 gpm · 40.0 L/min15.5 gpm · 58.7 L/min+47% 940
Rear PTO speeds declared540 rpm540/1000 rpmdiffers
Weight & dimensions
Unladen weight declared7,826 lb · 3,550 kg8,852 lb · 4,015 kg+13% 940
Wheelbase declared88.3 in · 2,242 mm83.8 in · 2,129 mm+5% 80-R
Length declared147.0 in · 3,734 mm141.0 in · 3,581 mm—
Width declared78.3 in · 1,988 mm84.0 in · 2,134 mm+7% 940
Ground clearance declared17.0 in · 432 mm17.5 in · 445 mm—
Turning radius, braked declared13.9 ft · 4.25 m9.5 ft · 2.90 m+47% 80-R
Fuel tank declared99.3 qt · 94.0 L95.9–120.0 qt · 90.8–113.6 Ldiffers

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Fiat 80-R sources

Source
  • Source: Traktorenlexikon, “Fiat 80 R”

J.I. Case 940 sources

Source
  • Source: Traktorenlexikon, “Case 940”