Fiat 80-90 (DT) vs Massey Ferguson MF 3070 (A)

9 material differences · fewer than 12

Tractor one

1984–1992

No measured PTO figure

Tractor two

1986–1993

No measured PTO figure

Which should you choose?

Read our verdict on the 80-90 (DT) and the MF 3070 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 6 fields identical or within 5%, which is not counted as material

Fiat 80-90 (DT) and Massey Ferguson MF 3070 (A), field by field
Field	80-90 (DT)	MF 3070 (A)	Gap
Engine
Engine power, claimed claimed	79.0 hp	88.8 hp	+12% MF 3070 (A)
Engine declared	FIAT-IVECO 8045.05.205 or 305	Perkins AT 4.236 LJ	differs
Displacement declared	3.91 L	3.86 L	—
Maximum torque declared	185 lb·ft · 251 N·m	242 lb·ft · 328 N·m	+31% MF 3070 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	dry VALEO, O.M.G. or LuK double clutch	Pedal operated dry air-cooled VALEO single plate clutch	differs
Hydraulics & hitch
Pump flow declared	9.4 gpm · 35.5 L/min	13.5 gpm · 51.1 L/min	+44% MF 3070 (A)
Pressure declared	3,046–3,118 psi · 210–215 bar	—	—
Three-point lift at ends declared	—	8,340 lb · 3,783 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	6,834 lb · 3,100 kg	8,598 lb · 3,900 kg	+26% MF 3070 (A)
Maximum permissible mass declared	11,684 lb · 5,300 kg	14,991 lb · 6,800 kg	+28% MF 3070 (A)
Wheelbase declared	92.2 in · 2,342 mm	96.9 in · 2,460 mm	—
Length declared	152.9 in · 3,884 mm	159.4 in · 4,048 mm	—
Width declared	76.0 in · 1,930 mm	74.4 in · 1,889 mm	—
Height declared	103.0 in · 2,615 mm	107.2 in · 2,724 mm	—
Ground clearance declared	19.9 in · 505 mm	16.0 in · 407 mm	+24% 80-90 (DT)
Turning radius, braked declared	12.0 ft · 3.65 m	—	—
Fuel tank declared	98.3 qt · 93.0 L	182.8 qt · 173.0 L	+86% MF 3070 (A)

Source

Source