Fiat 80-90 (DT) vs Massey Ferguson MF 194 (A)

8 material differences · fewer than 12

Tractor one

1984–1992

No measured PTO figure

Tractor two

1980–1983

No measured PTO figure

Which should you choose?

Read our verdict on the 80-90 (DT) and the MF 194 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 5 fields identical or within 5%, which is not counted as material

Fiat 80-90 (DT) and Massey Ferguson MF 194 (A), field by field
Field	80-90 (DT)	MF 194 (A)	Gap
Engine
Engine power, claimed claimed	79.0 hp	74.0 hp	+7% 80-90 (DT)
Engine declared	FIAT-IVECO 8045.05.205 or 305	Perkins A 4.248	differs
Displacement declared	3.91 L	4.07 L	—
Maximum torque declared	185 lb·ft · 251 N·m	212 lb·ft · 287 N·m	+14% MF 194 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	15.5 mph · 25 km/h	differs
Clutch declared	dry VALEO, O.M.G. or LuK double clutch	—	—
Hydraulics & hitch
Pump flow declared	9.4 gpm · 35.5 L/min	7.1 gpm · 26.7 L/min	+33% 80-90 (DT)
Pressure declared	3,046–3,118 psi · 210–215 bar	2,489 psi · 172 bar	differs
Three-point lift at ends declared	—	4,134 lb · 1,875 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	6,834 lb · 3,100 kg	5,952 lb · 2,700 kg	+15% 80-90 (DT)
Maximum permissible mass declared	11,684 lb · 5,300 kg	—	—
Wheelbase declared	92.2 in · 2,342 mm	90.2 in · 2,290 mm	—
Length declared	152.9 in · 3,884 mm	148.8 in · 3,780 mm	—
Width declared	76.0 in · 1,930 mm	—	—
Height declared	103.0 in · 2,615 mm	91.3 in · 2,320 mm	+13% 80-90 (DT)
Ground clearance declared	19.9 in · 505 mm	—	—
Turning radius, braked declared	12.0 ft · 3.65 m	12.0 ft · 3.65 m	—
Fuel tank declared	98.3 qt · 93.0 L	64.5 qt · 61.0 L	+52% 80-90 (DT)

Source

Source