Fiat 766 (DT) vs VALMET 4500

9 material differences · fewer than 12

Tractor one

1984–1986

No measured PTO figure

Tractor two

1993–1996

No measured PTO figure

Which should you choose?

Read our verdict on the 766 (DT) and the 4500 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 5 fields identical or within 5%, which is not counted as material

Fiat 766 (DT) and VALMET 4500, field by field
Field	766 (DT)	4500	Gap
Engine
Engine power, claimed claimed	—	74.0 hp	—
Engine declared	FIAT-IVECO 8045.04.276 or 376	VALMET 320 DS	differs
Displacement declared	3.66 L	3.30 L	+11% 766 (DT)
Maximum torque declared	193 lb·ft · 262 N·m	203 lb·ft · 275 N·m	—
Transmission
Top speed declared	15.5–18.6 mph · 25–30 km/h	18.6 mph · 30 km/h	differs
Clutch declared	—	Dry double clutch	—
Hydraulics & hitch
Pump flow declared	—	10.3 gpm · 39.0 L/min	—
Pressure declared	3,336–3,481 psi · 230–240 bar	2,901 psi · 200 bar	differs
Three-point lift at ends declared	7,893 lb · 3,580 kg	6,294 lb · 2,855 kg	+25% 766 (DT)
Rear PTO speeds declared	540 rpm	540E/540 rpm	differs
Weight & dimensions
Unladen weight declared	6,019 lb · 2,730 kg	6,217 lb · 2,820 kg	—
Wheelbase declared	90.7 in · 2,305 mm	83.1 in · 2,112 mm	+9% 766 (DT)
Length declared	142.6 in · 3,622 mm	149.2 in · 3,790 mm	—
Width declared	80.7 in · 2,050 mm	81.5 in · 2,070 mm	—
Height declared	95.9 in · 2,435 mm	95.1 in · 2,415 mm	—
Ground clearance declared	22.8 in · 580 mm	19.9 in · 505 mm	+15% 766 (DT)
Turning radius, braked declared	—	12.8 ft · 3.90 m	—
Fuel tank declared	77.1 qt · 73.0 L	100.4 qt · 95.0 L	+30% 4500

Source

Source