Fiat 766 (DT) vs Fiat TN 75 D (DT)

10 material differences · fewer than 12

Tractor one

1984–1986

No measured PTO figure

Tractor two

1999–2004

No measured PTO figure

Which should you choose?

Read our verdict on the 766 (DT) and the TN 75 D (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 3 fields identical or within 5%, which is not counted as material

Fiat 766 (DT) and Fiat TN 75 D (DT), field by field
Field	766 (DT)	TN 75 D (DT)	Gap
Engine
Engine power, claimed claimed	—	71 hp	—
Engine declared	FIAT-IVECO 8045.04.276 or 376	New Holland-Iveco 8035.25	differs
Displacement declared	3.66 L	2.93 L	+25% 766 (DT)
Maximum torque declared	193 lb·ft · 262 N·m	202 lb·ft · 274 N·m	—
Transmission
Top speed declared	15.5–18.6 mph · 25–30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Hydraulics & hitch
Pump flow declared	—	12.5 gpm · 47.4 L/min	—
Pressure declared	3,336–3,481 psi · 230–240 bar	—	—
Three-point lift at ends declared	7,893 lb · 3,580 kg	5,886 lb · 2,670 kg	+34% 766 (DT)
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	6,019 lb · 2,730 kg	6,746 lb · 3,060 kg	+12% TN 75 D (DT)
Maximum permissible mass declared	—	9,700 lb · 4,400 kg	—
Wheelbase declared	90.7 in · 2,305 mm	83.9 in · 2,130 mm	+8% 766 (DT)
Length declared	142.6 in · 3,622 mm	156.7 in · 3,980 mm	+10% TN 75 D (DT)
Width declared	80.7 in · 2,050 mm	72.8 in · 1,850 mm	+11% 766 (DT)
Height declared	95.9 in · 2,435 mm	94.5 in · 2,400 mm	—
Ground clearance declared	22.8 in · 580 mm	15.0 in · 380 mm	+53% 766 (DT)
Turning radius, braked declared	—	10.5 ft · 3.20 m	—
Fuel tank declared	77.1 qt · 73.0 L	74.0 qt · 70.0 L	—

Source

Source