10 material differences · fewer than 12
Tractor oneFiat 750-S (DT)1971–1975No measured PTO figureTractor twoInternational Harvester 885 (A)1981–1990No measured PTO figure
Which should you choose?
Read our verdict on the 750-S (DT) and the 885 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | 750-S (DT) | 885 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 78.9 hp | 78.9 hp | — |
| Engine declared | O.M.-FIAT CO 3/70 | INTERNATIONAL-HARVESTER DT-268 | differs |
| Displacement declared | 4.56 L | 4.40 L | — |
| Maximum torque declared | 231 lb·ft · 313 N·m | 201 lb·ft · 272 N·m | +15% 750-S (DT) |
| Transmission | |||
| Top speed declared | 14.9 mph · 24 km/h | 15.5 mph · 25 km/h | — |
| Clutch declared | Dry FEREDO double clutch, type 12/12" | Pedal-operated dry Laycock single-disc clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 7.3 gpm · 27.5 L/min | — | — |
| Pressure declared | 2,843 psi · 196 bar | 2,698 psi · 186 bar | +5% 750-S (DT) |
| Three-point lift, at the coupling points declared | 4,630 lb · 2,100 kg | 5,238 lb · 2,376 kg | +13% 885 (A) |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 7,275 lb · 3,300 kg | 7,363 lb · 3,340 kg | — |
| Wheelbase declared | 96.1 in · 2,440 mm | 88.2 in · 2,240 mm | +9% 750-S (DT) |
| Length declared | 140.2 in · 3,560 mm | 147.2 in · 3,740 mm | — |
| Width declared | 72.0 in · 1,830 mm | 75.6 in · 1,920 mm | — |
| Ground clearance declared | 20.5 in · 520 mm | 12.2 in · 310 mm | +68% 750-S (DT) |
| Turning radius, braked declared | 12.5 ft · 3.80 m | 11.6 ft · 3.55 m | +7% 750-S (DT) |
| Fuel tank declared | 85.6 qt · 81.0 L | 118.3 qt · 112.0 L | +38% 885 (A) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fiat 750-S (DT) sources
- Source: Traktorenlexikon, “Fiat 750 S/750 S/DT”
- Source: Traktorenlexikon, “Someca 750”
International Harvester 885 (A) sources
- Source: Traktorenlexikon, “IHC 885 (XL)”
- Source: Traktorenlexikon, “IHC 884”