Fiat 750 (DT) vs John Deere 3020

14 material differences

Tractor one

1968–1971

No measured PTO figure

Tractor two

1964–1972

No measured PTO figure

Which should you choose?

Read our verdict on the 750 (DT) and the 3020 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

14 material differences · 2 fields identical or within 5%, which is not counted as material

Fiat 750 (DT) and John Deere 3020, field by field
Field	750 (DT)	3020	Gap
Engine
Engine power, claimed claimed	74.0 hp	74.0 hp	—
Engine declared	O.M.-FIAT CO 3/70	John Deere 13 E	differs
Displacement declared	4.56 L	4.43 L	—
Maximum torque declared	206 lb·ft · 279 N·m	186 lb·ft · 252 N·m	+11% 750 (DT)
Transmission
Top speed declared	14.9 mph · 24 km/h	12.4–18.6 mph · 20–30 km/h	differs
Clutch declared	Pedal-operated two-stage dry FEREDO double clutch	Pedal-operated dry single-disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	—	Closed centre	—
Pump flow declared	7.3 gpm · 27.5 L/min	18.0 gpm · 68.0 L/min	+147% 3020
Pressure declared	2,843 psi · 196 bar	—	—
Three-point lift at ends declared	4,960 lb · 2,250 kg	3,968 lb · 1,800 kg	+25% 750 (DT)
Rear PTO speeds declared	540 rpm / 1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	6,713 lb · 3,045 kg	7,553 lb · 3,426 kg	+13% 3020
Maximum permissible mass declared	—	11,067 lb · 5,020 kg	—
Wheelbase declared	96.1 in · 2,440 mm	90.0 in · 2,286 mm	+7% 750 (DT)
Length declared	153.9 in · 3,910 mm	138.5 in · 3,518 mm	+11% 750 (DT)
Width declared	72.0 in · 1,830 mm	89.6 in · 2,276 mm	+24% 3020
Height declared	69.9 in · 1,775 mm	77.5 in · 1,969 mm	+11% 3020
Ground clearance declared	20.5 in · 520 mm	15.6 in · 395 mm	+32% 750 (DT)
Turning radius, braked declared	12.5 ft · 3.80 m	—	—
Fuel tank declared	85.6 qt · 81.0 L	116.0 qt · 109.8 L	+36% 3020

Source

Source