Fiat 72-86 (DT) vs John Deere 2300 (A)
13 material differences
Which should you choose?
Read our verdict on the 72-86 (DT) and the 2300 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
13 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | 72-86 (DT) | 2300 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 69.1 hp | 69.1 hp | — |
| Engine declared | FIAT-IVECO 8045.06.208 (309) | ZETOR 7701 | differs |
| Displacement declared | 3.61 L | 3.92 L | +9% 2300 (A) |
| Maximum torque declared | — | 182 lb·ft · 247 N·m | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6 mph · 30 km/h | differs |
| Hydraulics & hitch | |||
| Pump flow declared | — | 10.6 gpm · 40.2 L/min | — |
| Pressure declared | 3,118 psi · 215 bar | 1,160 psi · 80 bar | +169% 72-86 (DT) |
| Three-point lift at ends declared | 6,713 lb · 3,045 kg | 8,885 lb · 4,030 kg | +32% 2300 (A) |
| Rear PTO speeds declared | 540 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 4,292 lb · 1,947 kg | 7,187 lb · 3,260 kg | +67% 2300 (A) |
| Maximum permissible mass declared | — | 12,346 lb · 5,600 kg | — |
| Wheelbase declared | 77.1 in · 1,959 mm | 88.8 in · 2,256 mm | +15% 2300 (A) |
| Length declared | 133.5 in · 3,390 mm | 148.6 in · 3,775 mm | +11% 2300 (A) |
| Width declared | 60.6 in · 1,540 mm | 73.8 in · 1,875 mm | +22% 2300 (A) |
| Height declared | 79.9 in · 2,029 mm | 104.9 in · 2,665 mm | +31% 2300 (A) |
| Ground clearance declared | 15.0 in · 380 mm | 16.1 in · 410 mm | +8% 2300 (A) |
| Fuel tank declared | 47.6 qt · 45.0 L | 100.4 qt · 95.0 L | +111% 2300 (A) |
Fiat 72-86 (DT) sources
Source
- Source: Traktorenlexikon, “Fiatagri 72-86 F/72-86 F/DT”
- Source: Traktorenlexikon, “Fiatagri 70-86 V/70-86 V/DT”
John Deere 2300 (A) sources
Source
- Source: Traktorenlexikon, “John Deere 2300”