Fiat 715 (DT) vs VOLVO-BM 2250 (Bolinder-Munktell T 2250)
8 material differences · fewer than 12
Which should you choose?
Read our verdict on the 715 (DT) and the 2250 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 7 fields identical or within 5%, which is not counted as material
| Field | 715 (DT) | 2250 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 66.1 hp | 67 hp | — |
| Engine declared | O.M.-FIAT CO-2 D/70 | VOLVO-BM (PERKINS) D-39 T (AT 4.236) | differs |
| Displacement declared | — | 3.87 L | — |
| Maximum torque declared | — | 184 lb·ft · 249 N·m | — |
| Transmission | |||
| Top speed declared | 14.9 mph · 24 km/h | 18.6 mph · 30 km/h | +25% 2250 |
| Clutch declared | Pedal operated dry FERODO double clutch | Pedal-operated dry multi-plate clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 7.0 gpm · 26.5 L/min | 11.9 gpm · 45.0 L/min | +70% 2250 |
| Pressure declared | 2,843 psi · 196 bar | — | — |
| Three-point lift at ends declared | 4,960 lb · 2,250 kg | 4,894 lb · 2,220 kg | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 6,349 lb · 2,880 kg | 6,900 lb · 3,130 kg | +9% 2250 |
| Wheelbase declared | 86.6 in · 2,200 mm | 85.4 in · 2,170 mm | — |
| Length declared | 146.9 in · 3,730 mm | 144.9 in · 3,680 mm | — |
| Width declared | 77.2 in · 1,960 mm | 73.4 in · 1,865 mm | — |
| Height declared | 60.2 in · 1,529 mm | 88.6 in · 2,250 mm | +47% 2250 |
| Ground clearance declared | 18.1 in · 460 mm | 14.2 in · 360 mm | +28% 715 (DT) |
| Turning radius, braked declared | 12.5 ft · 3.80 m | 10.2 ft · 3.10 m | +23% 715 (DT) |
| Fuel tank declared | 88.8 qt · 84.0 L | 93.0 qt · 88.0 L | — |
Fiat 715 (DT) sources
Source
- Source: Traktorenlexikon, “Fiat 715/715 DT”
VOLVO-BM 2250 (Bolinder-Munktell T 2250) sources
Source
- Source: Traktorenlexikon, “Bolinder-Munktell T 2250”