Fiat 715 (DT) vs Lamborghini R-654 (DT)
8 material differences · fewer than 12
Which should you choose?
Read our verdict on the 715 (DT) and the R-654 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 715 (DT) | R-654 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 66.1 hp | 66.1 hp | — |
| Engine declared | O.M.-FIAT CO-2 D/70 | SAME 984-P | differs |
| Displacement declared | — | 3.62 L | — |
| Maximum torque declared | — | 181 lb·ft · 245 N·m | — |
| Transmission | |||
| Top speed declared | 14.9 mph · 24 km/h | 15.5 mph · 25 km/h | — |
| Clutch declared | Pedal operated dry FERODO double clutch | Dry VALEO double clutch, type 11 inches | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 7.0 gpm · 26.5 L/min | — | — |
| Pressure declared | 2,843 psi · 196 bar | — | — |
| Three-point lift at ends declared | 4,960 lb · 2,250 kg | 6,614 lb · 3,000 kg | +33% R-654 (DT) |
| Rear PTO speeds declared | 540 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,349 lb · 2,880 kg | 5,732 lb · 2,600 kg | +11% 715 (DT) |
| Wheelbase declared | 86.6 in · 2,200 mm | 89.1 in · 2,264 mm | — |
| Length declared | 146.9 in · 3,730 mm | 143.7 in · 3,650 mm | — |
| Width declared | 77.2 in · 1,960 mm | 66.1 in · 1,680 mm | +17% 715 (DT) |
| Height declared | 60.2 in · 1,529 mm | 92.9 in · 2,360 mm | +54% R-654 (DT) |
| Ground clearance declared | 18.1 in · 460 mm | 17.7 in · 450 mm | — |
| Turning radius, braked declared | 12.5 ft · 3.80 m | — | — |
| Fuel tank declared | 88.8 qt · 84.0 L | 68.7 qt · 65.0 L | +29% 715 (DT) |
Fiat 715 (DT) sources
Source
- Source: Traktorenlexikon, “Fiat 715/715 DT”
Lamborghini R-654 (DT) sources
Source
- Source: Traktorenlexikon, “Lamborghini 654 DT”