12 material differences
Tractor oneFiat 70-66 F (DT/F)1984–1991No measured PTO figureTractor twoSAME Explorer 70 (DT)1986–1990No measured PTO figure
Which should you choose?
Read our verdict on the 70-66 F (DT/F) and the Explorer 70 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
12 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | 70-66 F (DT/F) | Explorer 70 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 69.1 hp | 69.1 hp | — |
| Engine declared | FIAT-IVECO 8045.06.206 or 306 | SAME 1000.4 A | differs |
| Displacement declared | 3.61 L | 4.00 L | +11% Explorer 70 (DT) |
| Maximum torque declared | 165 lb·ft · 224 N·m | — | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | Dry Valeo or LuK double clutch | Pedal-operated dry SAME single-disc clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic control declared | — | Load sensing | — |
| Pump flow declared | 8.7 gpm · 32.8 L/min | 9.5 gpm · 36.0 L/min | +10% Explorer 70 (DT) |
| Pressure declared | 3,046 psi · 210 bar | 1,740 psi · 120 bar | +75% 70-66 F (DT/F) |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 4,277 lb · 1,940 kg | 6,085 lb · 2,760 kg | +42% Explorer 70 (DT) |
| Wheelbase declared | 78.8 in · 2,001 mm | 91.5 in · 2,325 mm | +16% Explorer 70 (DT) |
| Length declared | 121.7 in · 3,090 mm | 157.1 in · 3,990 mm | +29% Explorer 70 (DT) |
| Width declared | 65.7 in · 1,670 mm | 73.6–101.2 in · 1,870–2,570 mm | differs |
| Ground clearance declared | 17.1 in · 435 mm | 19.3 in · 490 mm | +13% Explorer 70 (DT) |
| Turning radius, braked declared | — | 9.4 ft · 2.88 m | — |
| Fuel tank declared | 52.8 qt · 50.0 L | 70.8 qt · 67.0 L | +34% Explorer 70 (DT) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fiat 70-66 F (DT/F) sources
- Source: Traktorenlexikon, “Fiat 70-66 F/70-66 F/DT”
- Source: Traktorenlexikon, “Fiat 70-66/70-66 DT”
SAME Explorer 70 (DT) sources
- Source: Traktorenlexikon, “SAME Explorer 70”