Fiat 70-66 F (DT/F) vs International Harvester 784

10 material differences · fewer than 12

Tractor one

1984–1991

No measured PTO figure

Tractor two

1977–1981

No measured PTO figure

Which should you choose?

Read our verdict on the 70-66 F (DT/F) and the 784 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 3 fields identical or within 5%, which is not counted as material

Fiat 70-66 F (DT/F) and International Harvester 784, field by field
Field	70-66 F (DT/F)	784	Gap
Engine
Engine power, claimed claimed	69.1 hp	75.9 hp	+10% 784
Engine declared	FIAT-IVECO 8045.06.206 or 306	INTERNATIONAL-HARVESTER D-246	differs
Displacement declared	3.61 L	4.03 L	+12% 784
Maximum torque declared	165 lb·ft · 224 N·m	159 lb·ft · 216 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	15.5 mph · 25 km/h	+20% 70-66 F (DT/F)
Clutch declared	Dry Valeo or LuK double clutch	—	—
Hydraulics & hitch
Pump flow declared	—	10.1 gpm · 38.2 L/min	—
Pressure declared	3,046 psi · 210 bar	2,698 psi · 186 bar	+13% 70-66 F (DT/F)
Three-point lift at ends declared	—	4,608 lb · 2,090 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	4,277 lb · 1,940 kg	5,238 lb · 2,376 kg	+22% 784
Wheelbase declared	78.8 in · 2,001 mm	88.0 in · 2,235 mm	+12% 784
Length declared	121.7 in · 3,090 mm	144.1 in · 3,660 mm	+18% 784
Width declared	65.7 in · 1,670 mm	68.9 in · 1,750 mm	—
Height declared	53.7 in · 1,365 mm	100.4 in · 2,550 mm	+87% 784
Ground clearance declared	17.1 in · 435 mm	15.6 in · 396 mm	+10% 70-66 F (DT/F)
Turning radius, braked declared	—	11.5 ft · 3.51 m	—
Fuel tank declared	52.8 qt · 50.0 L	81.4 qt · 77.0 L	+54% 784

Source

Source