8 material differences · fewer than 12
Tractor oneFiat 70-66 (DT)1984–1991No measured PTO figureTractor twoSchlüter Compact 750 V41984No measured PTO figure
Which should you choose?
Read our verdict on the 70-66 (DT) and the Compact 750 V4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 70-66 (DT) | Compact 750 V4 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 69.1 hp | 68.7 hp | — |
| Engine declared | FIAT-IVECO 8045.06.206 or 306 | MAN D 0224 ME 51 | differs |
| Displacement declared | 3.61 L | 3.79 L | — |
| Maximum torque declared | 165 lb·ft · 224 N·m | 195 lb·ft · 265 N·m | +18% Compact 750 V4 |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 23.8 mph · 38.3 km/h | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 8.7 gpm · 32.8 L/min | — | — |
| Pressure declared | 3,046 psi · 210 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/750/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,864 lb · 2,660 kg | 8,598 lb · 3,900 kg | +47% Compact 750 V4 |
| Maximum permissible mass declared | 10,141 lb · 4,600 kg | — | — |
| Wheelbase declared | 90.7 in · 2,305 mm | 94.5 in · 2,400 mm | — |
| Length declared | 137.8 in · 3,500 mm | 164.2 in · 4,170 mm | +19% Compact 750 V4 |
| Width declared | 75.2 in · 1,910 mm | 77.6 in · 1,970 mm | — |
| Ground clearance declared | 21.9 in · 555 mm | 18.5 in · 470 mm | +18% 70-66 (DT) |
| Turning radius, braked declared | 11.3 ft · 3.45 m | 13.1 ft · 4.00 m | +16% Compact 750 V4 |
| Fuel tank declared | 77.1 qt · 73.0 L | — | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fiat 70-66 (DT) sources
- Source: Traktorenlexikon, “Fiat 70-66/70-66 DT”
Schlüter Compact 750 V4 sources
- Source: Traktorenlexikon, “Schlüter Compact 750V 4”