Fiat 70-66 (DT) vs Renault 70-32 PX

8 material differences · fewer than 12

Tractor one

1984–1991

No measured PTO figure

Tractor two

1989–1992

No measured PTO figure

Which should you choose?

Read our verdict on the 70-66 (DT) and the 70-32 PX → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 6 fields identical or within 5%, which is not counted as material

Fiat 70-66 (DT) and Renault 70-32 PX, field by field
Field	70-66 (DT)	70-32 PX	Gap
Engine
Engine power, claimed claimed	69.1 hp	64.1 hp	+8% 70-66 (DT)
Engine declared	FIAT-IVECO 8045.06.206 or 306	Perkins LD 4.236	differs
Displacement declared	3.61 L	3.87 L	+7% 70-32 PX
Maximum torque declared	165 lb·ft · 224 N·m	180 lb·ft · 244 N·m	+9% 70-32 PX
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	—	Dry Valeo double clutch	—
Hydraulics & hitch
Pump flow declared	—	8.5 gpm · 32.1 L/min	—
Pressure declared	3,046 psi · 210 bar	—	—
Three-point lift at ends declared	6,393 lb · 2,900 kg	6,327 lb · 2,870 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	5,864 lb · 2,660 kg	6,393 lb · 2,900 kg	+9% 70-32 PX
Maximum permissible mass declared	10,141 lb · 4,600 kg	—	—
Wheelbase declared	90.7 in · 2,305 mm	92.1 in · 2,340 mm	—
Length declared	137.8 in · 3,500 mm	146.1 in · 3,710 mm	+6% 70-32 PX
Width declared	75.2 in · 1,910 mm	73.2 in · 1,860 mm	—
Height declared	98.6 in · 2,505 mm	96.1 in · 2,440 mm	—
Ground clearance declared	21.9 in · 555 mm	19.3 in · 490 mm	+13% 70-66 (DT)
Turning radius, braked declared	11.3 ft · 3.45 m	12.8 ft · 3.90 m	+13% 70-32 PX
Fuel tank declared	77.1 qt · 73.0 L	121.5 qt · 115.0 L	+58% 70-32 PX

Source

Source