Fiat 70-66 (DT) vs Massey Ferguson MF 3050 E

8 material differences · fewer than 12

Tractor one

1984–1991

No measured PTO figure

Tractor two

1988–1995

No measured PTO figure

Which should you choose?

Read our verdict on the 70-66 (DT) and the MF 3050 E → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 6 fields identical or within 5%, which is not counted as material

Fiat 70-66 (DT) and Massey Ferguson MF 3050 E, field by field
Field	70-66 (DT)	MF 3050 E	Gap
Engine
Engine power, claimed claimed	69.1 hp	70.1 hp	—
Engine declared	FIAT-IVECO 8045.06.206 or 306	Perkins A 4.236 LD	differs
Displacement declared	3.61 L	3.86 L	+7% MF 3050 E
Maximum torque declared	165 lb·ft · 224 N·m	187 lb·ft · 253 N·m	+13% MF 3050 E
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	15.5 mph · 25 km/h	differs
Clutch declared	—	pedal-operated, dry and air-cooled VALEO single-plate clutch	—
Hydraulics & hitch
Pressure declared	3,046 psi · 210 bar	—	—
Three-point lift at ends declared	6,393 lb · 2,900 kg	6,351 lb · 2,881 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	5,864 lb · 2,660 kg	7,848 lb · 3,560 kg	+34% MF 3050 E
Maximum permissible mass declared	10,141 lb · 4,600 kg	—	—
Wheelbase declared	90.7 in · 2,305 mm	93.3 in · 2,371 mm	—
Length declared	137.8 in · 3,500 mm	155.5 in · 3,950 mm	+13% MF 3050 E
Width declared	75.2 in · 1,910 mm	78.3 in · 1,990 mm	—
Height declared	98.6 in · 2,505 mm	103.1 in · 2,620 mm	—
Ground clearance declared	21.9 in · 555 mm	14.6 in · 370 mm	+50% 70-66 (DT)
Turning radius, braked declared	11.3 ft · 3.45 m	—	—
Fuel tank declared	77.1 qt · 73.0 L	156.4 qt · 148.0 L	+103% MF 3050 E

Source

Source