Fiat 70-66 (DT) or Landini 7800 (DT)?

Which should you choose?

On performance, every comparable figure that differs favours the Landini 7800 (DT): three-point lift. It is also ahead on forward gears.

  • The Landini 7800 (DT) suits loader and hydraulic implement work better on this data: 23% (660 kg / 1,455 lb) more three-point lift.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Fiat 70-66 (DT) and Landini 7800 (DT), with the call on each
Question70-66 (DT)7800 (DT)Call
Which puts more power through the PTO shaft?45.4 kW (60.9 hp)Traktorenlexikon, “Fiat 70-66/70-66 DT”45.5 kW (61.0 hp)Traktorenlexikon, “Landini 7800 DT”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 70-66 (DT) and the 7800 (DT).
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 70-66 (DT) and the 7800 (DT).
Which pumps more oil for implements?49.0 L/min (12.9 gpm)Traktorenlexikon, “Landini 7800 DT”No figureNo call on hydraulic flow: no figure on record for the 70-66 (DT).
Which lifts more on the three-point hitch?2,900 kg (6,393 lb)Traktorenlexikon, “Fiat 70-66/70-66 DT”3,560 kg (7,848 lb)Traktorenlexikon, “Landini 7800 DT”AheadThe Landini 7800 (DT) has 23% more lift (660 kg / 1,455 lb) than the Fiat 70-66 (DT) (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?2,660 kg (5,864 lb)Traktorenlexikon, “Fiat 70-66/70-66 DT”3,705 kg (8,168 lb)Traktorenlexikon, “Landini 7800 DT”Ahead (a fact, not an advantage)The Landini 7800 (DT) is 39% heavier (1,045 kg / 2,304 lb) than the Fiat 70-66 (DT) (both unladen weight, as stated by the source).
Which may carry more ballast and load?4,600 kg (10,141 lb)Traktorenlexikon, “Fiat 70-66/70-66 DT”No figureNo call on maximum permissible mass: no figure on record for the 7800 (DT).
Which has the wider choice of gears?12 to 20Traktorenlexikon, “Fiat 70-66/70-66 DT”32Traktorenlexikon, “Landini 7800 DT”AheadThe Landini 7800 (DT) has 60% more forward gears (12 gears) than the Fiat 70-66 (DT) (both forward gears, as stated by the source).
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 70-66 (DT) and the 7800 (DT).
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Fiat 70-66/70-66 DT”30 km/h (18.6 mph)Traktorenlexikon, “Landini 7800 DT”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Fiat 70-66/70-66 DT”540/1000 rpmTraktorenlexikon, “Landini 7800 DT”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Fiat 70-66/70-66 DT”independentTraktorenlexikon, “Landini 7800 DT”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Fiat 70-66/70-66 DT”2WD / 4WDTraktorenlexikon, “Landini 7800 DT”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1984–19911987–2000EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Landini 7800 (DT) has 23% more lift (660 kg / 1,455 lb) than the Fiat 70-66 (DT) (both lift at the hitch ends, as stated by the source).
  • The Landini 7800 (DT) is 39% heavier (1,045 kg / 2,304 lb) than the Fiat 70-66 (DT) (both unladen weight, as stated by the source).
  • The Landini 7800 (DT) has 60% more forward gears (12 gears) than the Fiat 70-66 (DT) (both forward gears, as stated by the source).
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources