10 material differences · fewer than 12
Tractor oneFiat 70-66 (DT)1984–1991No measured PTO figureTractor twoInternational Harvester Hydro 701973–1976No measured PTO figure
Which should you choose?
Read our verdict on the 70-66 (DT) and the Hydro 70 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | 70-66 (DT) | Hydro 70 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 69.1 hp | 69.1 hp | — |
| Engine declared | FIAT-IVECO 8045.06.206 or 306 | INTERNATIONAL HARVESTER C-291 | differs |
| Displacement declared | 3.61 L | — | — |
| Maximum torque declared | 165 lb·ft · 224 N·m | — | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 21.1 mph · 34 km/h | differs |
| Clutch declared | — | Pedal operated ceramic clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 8.7 gpm · 32.8 L/min | 12.0 gpm · 45.5 L/min | +39% Hydro 70 |
| Pressure declared | 3,046 psi · 210 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,864 lb · 2,660 kg | 8,439 lb · 3,828 kg | +44% Hydro 70 |
| Maximum permissible mass declared | 10,141 lb · 4,600 kg | — | — |
| Wheelbase declared | 90.7 in · 2,305 mm | 103.0 in · 2,616 mm | +13% Hydro 70 |
| Length declared | 137.8 in · 3,500 mm | 161.0 in · 4,089 mm | +17% Hydro 70 |
| Width declared | 75.2 in · 1,910 mm | 87.0 in · 2,210 mm | +16% Hydro 70 |
| Ground clearance declared | 21.9 in · 555 mm | 21.0 in · 533 mm | — |
| Turning radius, braked declared | 11.3 ft · 3.45 m | 12.0 ft · 3.66 m | +6% Hydro 70 |
| Fuel tank declared | 77.1 qt · 73.0 L | 123.9 qt · 117.3 L | +61% Hydro 70 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fiat 70-66 (DT) sources
- Source: Traktorenlexikon, “Fiat 70-66/70-66 DT”
International Harvester Hydro 70 sources
- Source: Traktorenlexikon, “IHC Hydro 70”
- Source: Traktorenlexikon, “Farmall Farmall 756”