8 material differences · fewer than 12
Tractor oneFiat 70-56 LM (DTfrom 1988No measured PTO figureTractor twoUTB U-703 DT1988–2004No measured PTO figure
Which should you choose?
Read our verdict on the 70-56 LM (DT and the U-703 DT → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | 70-56 LM (DT | U-703 DT | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 69.1 hp | 69.1 hp | — |
| Engine declared | Fiat 8045.06.206 or 307 | UTB D-2404.000 | differs |
| Displacement declared | 3.61 L | 3.76 L | — |
| Maximum torque declared | 164 lb·ft · 222 N·m | 175 lb·ft · 237 N·m | +7% U-703 DT |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | — | Dry U.T.B. double clutch | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 8.7 gpm · 32.8 L/min | 11.2 gpm · 42.5 L/min | +30% U-703 DT |
| Pressure declared | 3,046 psi · 210 bar | 2,031 psi · 140 bar | +50% 70-56 LM (DT |
| Rear PTO speeds declared | 540 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,357 lb · 2,430 kg | 7,198 lb · 3,265 kg | +34% U-703 DT |
| Wheelbase declared | 86.7 in · 2,203 mm | 87.2 in · 2,215 mm | — |
| Length declared | 143.3 in · 3,640 mm | 148.4 in · 3,770 mm | — |
| Width declared | 71.7–91.3 in · 1,820–2,320 mm | 76.3–103.5 in · 1,939–2,629 mm | differs |
| Ground clearance declared | 19.7 in · 500 mm | 9.7 in · 246 mm | +103% 70-56 LM (DT |
| Turning radius, braked declared | 10.7 ft · 3.26 m | — | — |
| Fuel tank declared | 63.4 qt · 60.0 L | 65.5 qt · 62.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fiat 70-56 LM (DT sources
- Source: Traktorenlexikon, “Fiatagri 70-56 LM (DT)”
UTB U-703 DT sources
- Source: Traktorenlexikon, “UTB U 703 DT”