Fiat 70-56 LM (DT vs Steyr 8080 (a)

9 material differences · fewer than 12

Tractor one

from 1988

No measured PTO figure

Tractor two

1979–1992

No measured PTO figure

Which should you choose?

Read our verdict on the 70-56 LM (DT and the 8080 (a) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 6 fields identical or within 5%, which is not counted as material

Fiat 70-56 LM (DT and Steyr 8080 (a), field by field
Field	70-56 LM (DT	8080 (a)	Gap
Engine
Engine power, claimed claimed	69.1 hp	69.1 hp	—
Engine declared	Fiat 8045.06.206 or 307	Steyr WD-411.86 or WD-411.85	differs
Displacement declared	3.61 L	3.46 L	—
Maximum torque declared	164 lb·ft · 222 N·m	189 lb·ft · 256 N·m	+15% 8080 (a)
Transmission
Top speed declared	18.6 mph · 30 km/h	15.5–24.9 mph · 25–40 km/h	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	8.7 gpm · 32.8 L/min	—	—
Pressure declared	3,046 psi · 210 bar	—	—
Three-point lift at ends declared	5,600 lb · 2,540 kg	5,732 lb · 2,600 kg	—
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	5,357 lb · 2,430 kg	6,191 lb · 2,808 kg	+16% 8080 (a)
Wheelbase declared	86.7 in · 2,203 mm	86.4 in · 2,195 mm	—
Length declared	143.3 in · 3,640 mm	148.4 in · 3,770 mm	—
Width declared	71.7 in · 1,820 mm	74.1 in · 1,883 mm	—
Height declared	95.3 in · 2,420 mm	101.2 in · 2,570 mm	+6% 8080 (a)
Ground clearance declared	19.7 in · 500 mm	15.7 in · 400 mm	+25% 70-56 LM (DT
Turning radius, braked declared	10.7 ft · 3.26 m	11.5 ft · 3.50 m	+7% 8080 (a)
Fuel tank declared	63.4 qt · 60.0 L	101.4 qt · 96.0 L	+60% 8080 (a)

Source

Source