12 material differences
Tractor oneFiat 70-56 LM (DTfrom 1988No measured PTO figureTractor twoHürlimann H-272 TA1989–1996No measured PTO figure
Which should you choose?
Read our verdict on the 70-56 LM (DT and the H-272 TA → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
12 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 70-56 LM (DT | H-272 TA | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 69.1 hp | 69.1 hp | — |
| Engine declared | Fiat 8045.06.206 or 307 | Hürlimann H-1000.3 AT | differs |
| Displacement declared | 3.61 L | 3.00 L | +20% 70-56 LM (DT |
| Maximum torque declared | 164 lb·ft · 222 N·m | 174 lb·ft · 236 N·m | +6% H-272 TA |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | — | Dry SLH double clutch | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 8.7 gpm · 32.8 L/min | 7.0 gpm · 26.4 L/min | +24% 70-56 LM (DT |
| Pressure declared | 3,046 psi · 210 bar | 1,305 psi · 90 bar | +133% 70-56 LM (DT |
| Rear PTO speeds declared | 540 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,357 lb · 2,430 kg | 6,283 lb · 2,850 kg | +17% H-272 TA |
| Maximum permissible mass declared | — | 10,141 lb · 4,600 kg | — |
| Wheelbase declared | 86.7 in · 2,203 mm | 86.4 in · 2,194 mm | — |
| Length declared | 143.3 in · 3,640 mm | 152.0 in · 3,860 mm | +6% H-272 TA |
| Width declared | 71.7–91.3 in · 1,820–2,320 mm | 76.0 in · 1,930 mm | differs |
| Ground clearance declared | 19.7 in · 500 mm | 14.4 in · 365 mm | +37% 70-56 LM (DT |
| Turning radius, braked declared | 10.7 ft · 3.26 m | 11.2 ft · 3.42 m | — |
| Fuel tank declared | 63.4 qt · 60.0 L | 82.4 qt · 78.0 L | +30% H-272 TA |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fiat 70-56 LM (DT sources
Source
- Source: Traktorenlexikon, “Fiatagri 70-56 LM (DT)”
Hürlimann H-272 TA sources
Source
- Source: Traktorenlexikon, “Hürlimann H 372”