Fiat 70-56 LM (DT vs Fiat 72-86 (DT)

10 material differences · fewer than 12

Tractor one

from 1988

No measured PTO figure

Tractor two

1992–2000

No measured PTO figure

Which should you choose?

Read our verdict on the 70-56 LM (DT and the 72-86 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 4 fields identical or within 5%, which is not counted as material

Fiat 70-56 LM (DT and Fiat 72-86 (DT), field by field
Field	70-56 LM (DT	72-86 (DT)	Gap
Engine
Engine power, claimed claimed	69.1 hp	69.1 hp	—
Engine declared	Fiat 8045.06.206 or 307	FIAT-IVECO 8045.06.208 (309)	differs
Displacement declared	3.61 L	3.61 L	—
Maximum torque declared	164 lb·ft · 222 N·m	—	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	8.7 gpm · 32.8 L/min	—	—
Pressure declared	3,046 psi · 210 bar	3,118 psi · 215 bar	—
Three-point lift at ends declared	5,600 lb · 2,540 kg	6,713 lb · 3,045 kg	+20% 72-86 (DT)
Rear PTO speeds declared	540 rpm	540 rpm	—
Weight & dimensions
Unladen weight declared	5,357 lb · 2,430 kg	4,292 lb · 1,947 kg	+25% 70-56 LM (DT
Wheelbase declared	86.7 in · 2,203 mm	77.1 in · 1,959 mm	+12% 70-56 LM (DT
Length declared	143.3 in · 3,640 mm	133.5 in · 3,390 mm	+7% 70-56 LM (DT
Width declared	71.7 in · 1,820 mm	60.6 in · 1,540 mm	+18% 70-56 LM (DT
Height declared	95.3 in · 2,420 mm	79.9 in · 2,029 mm	+19% 70-56 LM (DT
Ground clearance declared	19.7 in · 500 mm	15.0 in · 380 mm	+32% 70-56 LM (DT
Turning radius, braked declared	10.7 ft · 3.26 m	—	—
Fuel tank declared	63.4 qt · 60.0 L	47.6 qt · 45.0 L	+33% 70-56 LM (DT

Source

Source