Fiat 666 (DT) or Massey Ferguson MF 375 (A)?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the 666 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 375 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 666 (DT) | MF 375 (A) | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 50 kW (67 hp)Traktorenlexikon, “Fiat 666/666 DT” | 50.0 kW (67.1 hp)Traktorenlexikon, “Massey Ferguson MF 375” | Not comparableNot comparable on power at the PTO shaft: the 666 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 375 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 666 (DT) and the MF 375 (A). |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 666 (DT) and the MF 375 (A). |
| Which pumps more oil for implements? | — | 63.3 L/min (16.7 gpm)Traktorenlexikon, “Massey Ferguson MF 375” | No figureNo call on hydraulic flow: no figure on record for the 666 (DT). |
| Which lifts more on the three-point hitch? | 3,140 kg (6,923 lb)Traktorenlexikon, “Fiat 666/666 DT” | 3,060 kg (6,746 lb)Traktorenlexikon, “Massey Ferguson MF 375” | EvenEven on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which is heavier, for traction? | 2,580 kg (5,688 lb)Traktorenlexikon, “Fiat 666/666 DT” | 3,150 kg (6,945 lb)Traktorenlexikon, “Massey Ferguson MF 375” | Ahead (a fact, not an advantage)The Massey Ferguson MF 375 (A) is 22% heavier (570 kg / 1,257 lb) than the Fiat 666 (DT) (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | 6,200 kg (13,669 lb)Traktorenlexikon, “Massey Ferguson MF 375” | No figureNo call on maximum permissible mass: no figure on record for the 666 (DT). |
| Which has the wider choice of gears? | 12 to 20Traktorenlexikon, “Fiat 666/666 DT” | 8 to 12Traktorenlexikon, “Massey Ferguson MF 375” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 666 (DT) and the MF 375 (A). |
| Which is faster on the road? | 25 km/h (15.5 mph) to 30 km/h (18.6 mph)Traktorenlexikon, “Fiat 666/666 DT” | 30 km/h (18.6 mph)Traktorenlexikon, “Massey Ferguson MF 375” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540 rpmTraktorenlexikon, “Fiat 666/666 DT” | 540 rpm / 1000 rpmTraktorenlexikon, “Massey Ferguson MF 375” | AheadThe Massey Ferguson MF 375 (A) offers 1000 rpm at the PTO, which the Fiat 666 (DT) does not (as stated by the sources). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Fiat 666/666 DT” | independentTraktorenlexikon, “Massey Ferguson MF 375” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | Two-wheel or four-wheel driveTraktorenlexikon, “Fiat 666/666 DT” | 2WD / 4WDTraktorenlexikon, “Massey Ferguson MF 375” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1982–1986 | 1987–1997 | Ahead (a fact, not an advantage)The Massey Ferguson MF 375 (A) is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Massey Ferguson MF 375 (A) is 22% heavier (570 kg / 1,257 lb) than the Fiat 666 (DT) (both unladen weight, as stated by the source).
- The Massey Ferguson MF 375 (A) offers 1000 rpm at the PTO, which the Fiat 666 (DT) does not (as stated by the sources).
- The Massey Ferguson MF 375 (A) is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts.
- Even on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO independence: every PTO is independent.
- Even on drive: every machine is available with four-wheel drive.
- Not comparable on power at the PTO shaft: the 666 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 375 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass and a creeper range.
← Every figure for both machines, side by side, with sources