Fiat 666 (DT) vs Massey Ferguson MF 375 (A)

10 material differences · fewer than 12

Tractor one

1982–1986

No measured PTO figure

Tractor two

1987–1997

No measured PTO figure

Which should you choose?

Read our verdict on the 666 (DT) and the MF 375 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 4 fields identical or within 5%, which is not counted as material

Fiat 666 (DT) and Massey Ferguson MF 375 (A), field by field
Field	666 (DT)	MF 375 (A)	Gap
Engine
Engine power, claimed claimed	67 hp	67.1 hp	—
Engine declared	FIAT-IVECO 8045.02.276 or 376	Perkins A 4.236	differs
Displacement declared	3.46 L	3.87 L	+12% MF 375 (A)
Maximum torque declared	161 lb·ft · 218 N·m	173 lb·ft · 234 N·m	+7% MF 375 (A)
Transmission
Top speed declared	15.5–18.6 mph · 25–30 km/h	18.6 mph · 30 km/h	differs
Hydraulics & hitch
Pump flow declared	—	16.7 gpm · 63.3 L/min	—
Pressure declared	—	2,466 psi · 170 bar	—
Three-point lift at ends declared	6,923 lb · 3,140 kg	6,746 lb · 3,060 kg	—
Rear PTO speeds declared	540 rpm	540 rpm / 1000 rpm	differs
Weight & dimensions
Unladen weight declared	5,688 lb · 2,580 kg	6,945 lb · 3,150 kg	+22% MF 375 (A)
Maximum permissible mass declared	—	13,669 lb · 6,200 kg	—
Wheelbase declared	90.7 in · 2,305 mm	89.8 in · 2,280 mm	—
Length declared	134.3 in · 3,412 mm	153.1 in · 3,888 mm	+14% MF 375 (A)
Width declared	77.2 in · 1,960 mm	78.0 in · 1,980 mm	—
Height declared	92.7 in · 2,355 mm	104.1 in · 2,645 mm	+12% MF 375 (A)
Ground clearance declared	19.5 in · 495 mm	12.2 in · 311 mm	+59% 666 (DT)
Turning radius, braked declared	12.6 ft · 3.84 m	—	—
Fuel tank declared	77.1 qt · 73.0 L	114.1 qt · 108 L	+48% MF 375 (A)

Source

Source