Fiat 65-94 DT vs Hürlimann H-272 TA

15 material differences

Tractor one

1993–1996

No measured PTO figure

Tractor two

1989–1996

No measured PTO figure

Which should you choose?

Read our verdict on the 65-94 DT and the H-272 TA → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

15 material differences · 2 fields identical or within 5%, which is not counted as material

Fiat 65-94 DT and Hürlimann H-272 TA, field by field
Field	65-94 DT	H-272 TA	Gap
Engine
Engine power, claimed claimed	—	69.1 hp	—
Engine declared	Fiat-Iveco 8045.06	Hürlimann H-1000.3 AT	differs
Displacement declared	3.61 L	3.00 L	+20% 65-94 DT
Maximum torque declared	162 lb·ft · 220 N·m	174 lb·ft · 236 N·m	+7% H-272 TA
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Dry Valeo or LuK double clutch	Dry SLH double clutch	differs
Hydraulics & hitch
Pump flow declared	10.3 gpm · 39.0 L/min	7.0 gpm · 26.4 L/min	+48% 65-94 DT
Pressure declared	3,263–3,408 psi · 225–235 bar	1,305 psi · 90 bar	differs
Three-point lift at ends declared	6,393 lb · 2,900 kg	3,968 lb · 1,800 kg	+61% 65-94 DT
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	7,165 lb · 3,250 kg	6,283 lb · 2,850 kg	+14% 65-94 DT
Maximum permissible mass declared	11,684 lb · 5,300 kg	10,141 lb · 4,600 kg	+15% 65-94 DT
Wheelbase declared	92.1 in · 2,340 mm	86.4 in · 2,194 mm	+7% 65-94 DT
Length declared	134.3 in · 3,410 mm	152.0 in · 3,860 mm	+13% H-272 TA
Width declared	80.3 in · 2,040 mm	76.0 in · 1,930 mm	+6% 65-94 DT
Height declared	99.6 in · 2,530 mm	93.5 in · 2,375 mm	+7% 65-94 DT
Ground clearance declared	15.7 in · 400 mm	14.4 in · 365 mm	+10% 65-94 DT
Turning radius, braked declared	—	11.2 ft · 3.42 m	—
Fuel tank declared	98.3 qt · 93.0 L	82.4 qt · 78.0 L	+19% 65-94 DT

Source

Source