11 material differences · fewer than 12

Tractor oneFiat 65-66 S (DT)1992–1996No measured PTO figureTractor twoRenault Ceres 75 X (A)1994–1998No measured PTO figure

Which should you choose?

Read our verdict on the 65-66 S (DT) and the Ceres 75 X (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 3 fields identical or within 5%, which is not counted as material

Fiat 65-66 S (DT) and Renault Ceres 75 X (A), field by field
Field	65-66 S (DT)	Ceres 75 X (A)	Gap
Engine
Engine power, claimed claimed	64.1 hp	64.1 hp	—
Engine declared	Fiat 8045.06	JOHN DEERE 4039 DRT 35	differs
Displacement declared	3.61 L	3.92 L	+8% Ceres 75 X (A)
Maximum torque declared	159 lb·ft · 216 N·m	169 lb·ft · 229 N·m	+6% Ceres 75 X (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	—	Dry LuK double clutch	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	9.1 gpm · 34.5 L/min	—	—
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	6,206 lb · 2,815 kg	6,967 lb · 3,160 kg	+12% Ceres 75 X (A)
Maximum permissible mass declared	9,259 lb · 4,200 kg	11,684 lb · 5,300 kg	+26% Ceres 75 X (A)
Wheelbase declared	89.8 in · 2,280 mm	94.8–95.7 in · 2,407–2,430 mm	differs
Length declared	147.2 in · 3,740 mm	156.7 in · 3,979 mm	+6% Ceres 75 X (A)
Width declared	78.0 in · 1,980 mm	73.2–92.3 in · 1,860–2,345 mm	differs
Height, over the cab declared	96.5 in · 2,450 mm	99.2 in · 2,520 mm	—
Ground clearance declared	19.3 in · 490 mm	16.9 in · 430 mm	+14% 65-66 S (DT)
Turning radius, braked declared	—	12.5 ft · 3.80 m	—
Fuel tank declared	77.1 qt · 73.0 L	121.5 qt · 115.0 L	+58% Ceres 75 X (A)

Source

Source