9 material differences · fewer than 12

Tractor oneFiat 65-66 (DT)1985–1991No measured PTO figureTractor twoSAME Explorer 65 (DT)1983–1986No measured PTO figure

Which should you choose?

Read our verdict on the 65-66 (DT) and the Explorer 65 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

9 material differences · 7 fields identical or within 5%, which is not counted as material

Fiat 65-66 (DT) and SAME Explorer 65 (DT), field by field
Field65-66 (DT)Explorer 65 (DT)Gap
Engine
Engine power, claimed claimed64.1 hp64.1 hp—
Engine declaredFIAT-IVECO 8045.06.220 or 320SAME 916.4 Adiffers
Displacement declared3.61 L3.67 L—
Maximum torque declared156 lb·ft · 212 N·m153 lb·ft · 208 N·m—
Transmission
Top speed declared18.6–24.9 mph · 30–40 km/h18.6 mph · 30 km/hdiffers
Clutch declareddry VALEO or LuK double clutchpedal-operated dry single-disc clutchdiffers
Hydraulics & hitch
Hydraulic control declared—Load sensing—
Pump flow declared8.7 gpm · 32.8 L/min9.6 gpm · 36.5 L/min+11% Explorer 65 (DT)
Pressure declared3,046 psi · 210 bar2,611 psi · 180 bar+17% 65-66 (DT)
Rear PTO speeds declared540/1000 rpm540 rpmdiffers
Weight & dimensions
Unladen weight declared5,534 lb · 2,510 kg5,379 lb · 2,440 kg—
Maximum permissible mass declared9,259 lb · 4,200 kg——
Wheelbase declared90.9 in · 2,310 mm91.5 in · 2,325 mm—
Length declared148.4 in · 3,770 mm151.6 in · 3,850 mm—
Width declared75.2 in · 1,910 mm76.8–96.5 in · 1,950–2,450 mmdiffers
Ground clearance declared15.7 in · 400 mm17.9 in · 455 mm+14% Explorer 65 (DT)
Turning radius, braked declared11.3 ft · 3.45 m11.0 ft · 3.35 m—
Fuel tank declared77.1 qt · 73.0 L70.8 qt · 67.0 L+9% 65-66 (DT)

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Fiat 65-66 (DT) sources

Source
  • Source: Traktorenlexikon, “Fiat 65-66/65-66 DT”

SAME Explorer 65 (DT) sources

Source
  • Source: Traktorenlexikon, “SAME Explorer 65”