11 material differences · fewer than 12
Tractor oneFiat 65-56 LM (DT)from 1988No measured PTO figureTractor twoRenault 70-32 PX1989–1992No measured PTO figure
Which should you choose?
Read our verdict on the 65-56 LM (DT) and the 70-32 PX → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 65-56 LM (DT) | 70-32 PX | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 64.1 hp | 64.1 hp | — |
| Engine declared | Fiat 8045.06.220 or 320 | Perkins LD 4.236 | differs |
| Displacement declared | 3.61 L | 3.87 L | +7% 70-32 PX |
| Maximum torque declared | 151 lb·ft · 205 N·m | 180 lb·ft · 244 N·m | +19% 70-32 PX |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | Dry LuK or VALEO double clutch | Dry Valeo double clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 8.7 gpm · 32.8 L/min | 8.5 gpm · 32.1 L/min | — |
| Pressure declared | 3,046 psi · 210 bar | — | — |
| Three-point lift, at the coupling points declared | 3,847 lb · 1,745 kg | 6,327 lb · 2,870 kg | +64% 70-32 PX |
| Rear PTO speeds declared | 540 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,004 lb · 2,270 kg | 6,393 lb · 2,900 kg | +28% 70-32 PX |
| Wheelbase declared | 85.3 in · 2,167 mm | 92.1 in · 2,340 mm | +8% 70-32 PX |
| Length declared | 141.7 in · 3,600 mm | 146.1 in · 3,710 mm | — |
| Width declared | 71.7–91.3 in · 1,820–2,320 mm | 73.2–92.3 in · 1,860–2,345 mm | — |
| Ground clearance declared | 18.9 in · 480 mm | 19.3 in · 490 mm | — |
| Turning radius, braked declared | 11.5 ft · 3.51 m | 12.8 ft · 3.90 m | +11% 70-32 PX |
| Fuel tank declared | 63.4 qt · 60.0 L | 121.5 qt · 115.0 L | +92% 70-32 PX |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fiat 65-56 LM (DT) sources
- Source: Traktorenlexikon, “Fiatagri 65-56 LM (DT)”
Renault 70-32 PX sources
- Source: Traktorenlexikon, “Renault 70-32 PE/PA/PS/PX R3131”
- Source: Traktorenlexikon, “Massey Ferguson MF 373”