13 material differences
Tractor oneFiat 65-56 LM (DT)from 1988No measured PTO figureTractor twoMassey Ferguson MF 365 (A)1988–1997No measured PTO figure
Which should you choose?
Read our verdict on the 65-56 LM (DT) and the MF 365 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
13 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | 65-56 LM (DT) | MF 365 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 64.1 hp | 64 hp | — |
| Engine declared | Fiat 8045.06.220 or 320 | Perkins A 4.236 | differs |
| Displacement declared | 3.61 L | 3.87 L | +7% MF 365 (A) |
| Maximum torque declared | 151 lb·ft · 205 N·m | 181 lb·ft · 246 N·m | +20% MF 365 (A) |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | Dry LuK or VALEO double clutch | Dry and air-cooled double clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 8.7 gpm · 32.8 L/min | — | — |
| Pressure declared | 3,046 psi · 210 bar | 2,466 psi · 170 bar | +24% 65-56 LM (DT) |
| Rear PTO speeds declared | 540 rpm | 540/540E rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,004 lb · 2,270 kg | 5,712 lb · 2,591 kg | +14% MF 365 (A) |
| Wheelbase declared | 85.3 in · 2,167 mm | 90.0 in · 2,286 mm | +5% MF 365 (A) |
| Length declared | 141.7 in · 3,600 mm | 149.6 in · 3,800 mm | +6% MF 365 (A) |
| Width declared | 71.7–91.3 in · 1,820–2,320 mm | 72.8 in · 1,850 mm | differs |
| Ground clearance declared | 18.9 in · 480 mm | 15.7 in · 400 mm | +20% 65-56 LM (DT) |
| Turning radius, braked declared | 11.5 ft · 3.51 m | — | — |
| Fuel tank declared | 63.4 qt · 60.0 L | 114.1 qt · 108.0 L | +80% MF 365 (A) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fiat 65-56 LM (DT) sources
Source
- Source: Traktorenlexikon, “Fiatagri 65-56 LM (DT)”
Massey Ferguson MF 365 (A) sources
Source
- Source: Traktorenlexikon, “Massey Ferguson MF 365”
- Source: Traktorenlexikon, “Massey Ferguson MF 168 & MF 168A”