13 material differences
Tractor oneFiat 640 (DT)1973–1982No measured PTO figureTractor twoLeyland 2621975–1980No measured PTO figure
Which should you choose?
Read our verdict on the 640 (DT) and the 262 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
13 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 640 (DT) | 262 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 63.2 hp | 62.1 hp | — |
| Engine declared | FIAT-IVECO 8045.02.200/307 | LEYLAND-MOTORS 4/98 DT | differs |
| Displacement declared | 3.46 L | 3.77 L | +9% 262 |
| Maximum torque declared | 162 lb·ft · 219 N·m | 165 lb·ft · 224 N·m | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 18.6 mph · 30 km/h | +20% 262 |
| Clutch declared | Dry Ferodo double clutch | Dry Borg & Beck double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 5.8 gpm · 21.8 L/min | 8.3 gpm · 31.3 L/min | +44% 262 |
| Three-point lift, at the coupling points declared | 4,960 lb · 2,250 kg | 4,136 lb · 1,876 kg | +20% 640 (DT) |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 5,181 lb · 2,350 kg | 6,724 lb · 3,050 kg | +30% 262 |
| Maximum permissible mass declared | 8,157 lb · 3,700 kg | — | — |
| Wheelbase declared | 84.3 in · 2,140 mm | 80.0 in · 2,032 mm | +5% 640 (DT) |
| Length declared | 138.6 in · 3,520 mm | 146.9 in · 3,730 mm | +6% 262 |
| Width declared | 67.5–93.1 in · 1,715–2,365 mm | 78.7 in · 2,000 mm | differs |
| Ground clearance declared | 20.1 in · 510 mm | 14.8 in · 377 mm | +35% 640 (DT) |
| Turning radius, braked declared | 11.2 ft · 3.42 m | 10.5 ft · 3.19 m | +7% 640 (DT) |
| Fuel tank declared | 57.1 qt · 54.0 L | 72.1 qt · 68.2 L | +26% 262 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fiat 640 (DT) sources
Source
- Source: Traktorenlexikon, “Fiat 640/640 DT”
- Source: Traktorenlexikon, “Someca 640”
Leyland 262 sources
Source
- Source: Traktorenlexikon, “Leyland 262”
- Source: Traktorenlexikon, “Leyland 255”