7 material differences · fewer than 12
Tractor oneFiat 600 (DT)1971–1973No measured PTO figureTractor twoLamborghini R-360 (DT)1969–1972No measured PTO figure
Which should you choose?
Read our verdict on the 600 (DT) and the R-360 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 600 (DT) | R-360 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 59.3 hp | 59.1 hp | — |
| Engine declared | Fiat 8045.02 | LAMBORGHINI FL-1153 | differs |
| Displacement declared | 3.46 L | 3.74 L | +8% R-360 (DT) |
| Maximum torque declared | 147 lb·ft · 199 N·m | — | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 15.5 mph · 25 km/h | — |
| Clutch declared | — | Pedal operated dry WALTERSCHEID double clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 5.8 gpm · 21.8 L/min | 6.4 gpm · 24.2 L/min | +11% R-360 (DT) |
| Pressure declared | 2,901 psi · 200 bar | — | — |
| Rear PTO speeds declared | 540 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 4,960 lb · 2,250 kg | 5,622 lb · 2,550 kg | +13% R-360 (DT) |
| Wheelbase declared | 81.5 in · 2,070 mm | 82.5 in · 2,095 mm | — |
| Length declared | 133.9 in · 3,400 mm | 126.8 in · 3,220 mm | +6% 600 (DT) |
| Width declared | 68.1–95.7 in · 1,730–2,430 mm | 68.9 in · 1,750 mm | differs |
| Ground clearance declared | 17.7 in · 450 mm | — | — |
| Turning radius, braked declared | 10.7 ft · 3.25 m | 11.2 ft · 3.41 m | — |
| Fuel tank declared | 57.1 qt · 54.0 L | — | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fiat 600 (DT) sources
- Source: Traktorenlexikon, “Fiat 600N/600 DT”
Lamborghini R-360 (DT) sources
- Source: Traktorenlexikon, “Lamborghini R 360 (DT)”