11 material differences · fewer than 12
Tractor oneFiat 60-66 (DT)1984–1988No measured PTO figureTractor twoFiat 600 (DT)1971–1973No measured PTO figure
Which should you choose?
We will not advise between these two machines, because they were not built in overlapping years (1984–1988; 1971–1973). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
11 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 60-66 (DT) | 600 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 59.3 hp | 59.3 hp | — |
| Engine declared | FIAT-IVECO 8035.05.206 or 306 | Fiat 8045.02 | differs |
| Displacement declared | 2.93 L | 3.46 L | +18% 600 (DT) |
| Maximum torque declared | 139 lb·ft · 188 N·m | 147 lb·ft · 199 N·m | +6% 600 (DT) |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 15.5 mph · 25 km/h | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 8.7 gpm · 32.8 L/min | 5.8 gpm · 21.8 L/min | +50% 60-66 (DT) |
| Pressure declared | 3,046 psi · 210 bar | 2,901 psi · 200 bar | — |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,236 lb · 2,375 kg | 4,960 lb · 2,250 kg | +6% 60-66 (DT) |
| Maximum permissible mass declared | 9,259 lb · 4,200 kg | — | — |
| Wheelbase declared | 85.6 in · 2,175 mm | 81.5 in · 2,070 mm | — |
| Length declared | 129.9 in · 3,300 mm | 133.9 in · 3,400 mm | — |
| Width declared | 75.2 in · 1,910 mm | 68.1–95.7 in · 1,730–2,430 mm | differs |
| Ground clearance declared | 19.5 in · 495 mm | 17.7 in · 450 mm | +10% 60-66 (DT) |
| Turning radius, braked declared | 11.5 ft · 3.50 m | 10.7 ft · 3.25 m | +8% 60-66 (DT) |
| Fuel tank declared | 77.1 qt · 73.0 L | 57.1 qt · 54.0 L | +35% 60-66 (DT) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fiat 60-66 (DT) sources
- Source: Traktorenlexikon, “Fiat 60-66/60-66 DT”
Fiat 600 (DT) sources
- Source: Traktorenlexikon, “Fiat 600N/600 DT”