Fiat 60-56 LM (DT) vs ZETOR 8641

16 material differences

Tractor one

from 1988

No measured PTO figure

Tractor two

1999–2002

No measured PTO figure

Which should you choose?

Read our verdict on the 60-56 LM (DT) and the 8641 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

16 material differences · 0 fields identical or within 5%, which is not counted as material

Fiat 60-56 LM (DT) and ZETOR 8641, field by field
Field	60-56 LM (DT)	8641	Gap
Engine
Engine power, claimed claimed	59.3 hp	79.9 hp	+35% 8641
Engine declared	Fiat 8035.05.206 or 307	ZETOR Z-1203	differs
Displacement declared	2.93 L	4.16 L	+42% 8641
Maximum torque declared	136 lb·ft · 185 N·m	230 lb·ft · 312 N·m	+69% 8641
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Dry LuK or VALEO double clutch, pedal-operated driving clutch	Pedal-operated dry Zetor single-disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	8.7 gpm · 32.8 L/min	15.1 gpm · 57.0 L/min	+74% 8641
Pressure declared	3,046 psi · 210 bar	1,813 psi · 125 bar	+68% 60-56 LM (DT)
Three-point lift at ends declared	3,847 lb · 1,745 kg	12,456 lb · 5,650 kg	+224% 8641
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	4,828 lb · 2,190 kg	9,678 lb · 4,390 kg	+100% 8641
Maximum permissible mass declared	—	14,771 lb · 6,700 kg	—
Wheelbase declared	80.8 in · 2,052 mm	94.0 in · 2,388 mm	+16% 8641
Length declared	137.0 in · 3,480 mm	189.6 in · 4,815 mm	+38% 8641
Width declared	73.6 in · 1,870 mm	80.7 in · 2,050 mm	+10% 8641
Height declared	94.5 in · 2,400 mm	106.9 in · 2,715 mm	+13% 8641
Ground clearance declared	18.9 in · 480 mm	13.4 in · 340 mm	+41% 60-56 LM (DT)
Turning radius, braked declared	10.7 ft · 3.25 m	—	—
Fuel tank declared	63.4 qt · 60.0 L	190.2 qt · 180.0 L	+200% 8641

Source

Source