Fiat 60-56 LM (DT) vs New Holland TN 60 DA/SA

10 material differences · fewer than 12

Tractor one

from 1988

No measured PTO figure

Tractor two

2003–2008

No measured PTO figure

Which should you choose?

Read our verdict on the 60-56 LM (DT) and the TN 60 DA/SA → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 6 fields identical or within 5%, which is not counted as material

Fiat 60-56 LM (DT) and New Holland TN 60 DA/SA, field by field
Field	60-56 LM (DT)	TN 60 DA/SA	Gap
Engine
Engine power, claimed claimed	59.3 hp	58.2 hp	—
Engine declared	Fiat 8035.05.206 or 307	IVECO 8035.05 C	differs
Displacement declared	2.93 L	2.93 L	—
Maximum torque declared	136 lb·ft · 185 N·m	146 lb·ft · 198 N·m	+7% TN 60 DA/SA
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Dry LuK or VALEO double clutch, pedal-operated driving clutch	dry LuK double clutch, pedal-operated driving clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	8.7 gpm · 32.8 L/min	12.4 gpm · 47.0 L/min	+43% TN 60 DA/SA
Pressure declared	3,046 psi · 210 bar	—	—
Three-point lift at ends declared	3,847 lb · 1,745 kg	5,368 lb · 2,435 kg	+40% TN 60 DA/SA
Rear PTO speeds declared	540 rpm	540/540E/1000 rpm	differs
Weight & dimensions
Unladen weight declared	4,828 lb · 2,190 kg	5,214 lb · 2,365 kg	+8% TN 60 DA/SA
Wheelbase declared	80.8 in · 2,052 mm	81.5 in · 2,070 mm	—
Length declared	137.0 in · 3,480 mm	141.8 in · 3,601 mm	—
Width declared	73.6 in · 1,870 mm	73.5 in · 1,867 mm	—
Height declared	94.5 in · 2,400 mm	97.5 in · 2,476 mm	—
Ground clearance declared	18.9 in · 480 mm	13.9 in · 353 mm	+36% 60-56 LM (DT)
Turning radius, braked declared	10.7 ft · 3.25 m	—	—
Fuel tank declared	63.4 qt · 60.0 L	56.0 qt · 53.0 L	+13% 60-56 LM (DT)

Source

Source