Fiat 60-56 LM (DT) vs Landini 6030 (DT) TL-39 N/B (TL-39 DT/B)

7 material differences · fewer than 12

Tractor one

from 1988

No measured PTO figure

Tractor two

1983–1987

No measured PTO figure

Which should you choose?

Read our verdict on the 60-56 LM (DT) and the 6030 (DT) TL-39 N/B (TL-39 DT/B) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

7 material differences · 10 fields identical or within 5%, which is not counted as material

Fiat 60-56 LM (DT) and Landini 6030 (DT) TL-39 N/B (TL-39 DT/B), field by field
Field	60-56 LM (DT)	6030 (DT) TL-39 N/B (TL-39 DT/B)	Gap
Engine
Engine power, claimed claimed	59.3 hp	55.3 hp	+7% 60-56 LM (DT)
Engine declared	Fiat 8035.05.206 or 307	Perkins AT 3.152-4	differs
Displacement declared	2.93 L	2.50 L	+17% 60-56 LM (DT)
Maximum torque declared	136 lb·ft · 185 N·m	131 lb·ft · 178 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	Dry LuK or VALEO double clutch, pedal-operated driving clutch	Dry and air-cooled OMG or LuK double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	8.7 gpm · 32.8 L/min	9.6 gpm · 36.5 L/min	+11% 6030 (DT) TL-39 N/B (TL-39 DT/B)
Pressure declared	3,046 psi · 210 bar	2,901 psi · 200 bar	—
Three-point lift at ends declared	3,847 lb · 1,745 kg	4,429 lb · 2,009 kg	+15% 6030 (DT) TL-39 N/B (TL-39 DT/B)
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	4,828 lb · 2,190 kg	4,971 lb · 2,255 kg	—
Wheelbase declared	80.8 in · 2,052 mm	81.9 in · 2,080 mm	—
Length declared	137.0 in · 3,480 mm	138.2 in · 3,510 mm	—
Width declared	73.6 in · 1,870 mm	75.6 in · 1,920 mm	—
Height declared	94.5 in · 2,400 mm	91.9 in · 2,335 mm	—
Ground clearance declared	18.9 in · 480 mm	19.5 in · 495 mm	—
Turning radius, braked declared	10.7 ft · 3.25 m	12.4 ft · 3.79 m	+17% 6030 (DT) TL-39 N/B (TL-39 DT/B)
Fuel tank declared	63.4 qt · 60.0 L	63.9 qt · 60.5 L	—

Source

Source