9 material differences · fewer than 12
Tractor oneFiat 60-56 LM (DT)from 1988No measured PTO figureTractor twoFiat 60-66 (DT)1984–1988No measured PTO figure
Which should you choose?
Read our verdict on the 60-56 LM (DT) and the 60-66 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | 60-56 LM (DT) | 60-66 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 59.3 hp | 59.3 hp | — |
| Engine declared | Fiat 8035.05.206 or 307 | FIAT-IVECO 8035.05.206 or 306 | differs |
| Displacement declared | 2.93 L | 2.93 L | — |
| Maximum torque declared | 136 lb·ft · 185 N·m | 139 lb·ft · 188 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | Dry LuK or VALEO double clutch, pedal-operated driving clutch | — | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 8.7 gpm · 32.8 L/min | 8.7 gpm · 32.8 L/min | — |
| Pressure declared | 3,046 psi · 210 bar | 3,046 psi · 210 bar | — |
| Rear PTO speeds declared | 540 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 4,828 lb · 2,190 kg | 5,236 lb · 2,375 kg | +8% 60-66 (DT) |
| Maximum permissible mass declared | — | 9,259 lb · 4,200 kg | — |
| Wheelbase declared | 80.8 in · 2,052 mm | 85.6 in · 2,175 mm | +6% 60-66 (DT) |
| Length declared | 137.0 in · 3,480 mm | 129.9 in · 3,300 mm | +5% 60-56 LM (DT) |
| Width declared | 73.6–92.1 in · 1,870–2,340 mm | 75.2 in · 1,910 mm | differs |
| Ground clearance declared | 18.9 in · 480 mm | 19.5 in · 495 mm | — |
| Turning radius, braked declared | 10.7 ft · 3.25 m | 11.5 ft · 3.50 m | +8% 60-66 (DT) |
| Fuel tank declared | 63.4 qt · 60.0 L | 77.1 qt · 73.0 L | +22% 60-66 (DT) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fiat 60-56 LM (DT) sources
- Source: Traktorenlexikon, “Fiatagri 60-56 LM (DT)”
Fiat 60-66 (DT) sources
- Source: Traktorenlexikon, “Fiat 60-66/60-66 DT”