Fiat 570 V/E or VALMET 504?
Which should you choose?
On performance, every comparable figure that differs favours the Fiat 570 V/E: three-point lift. It is also ahead on forward gears and drive. On features, the VALMET 504 is ahead on top speed.
- The Fiat 570 V/E suits loader and hydraulic implement work better on this data: 11% (205 kg / 452 lb) more three-point lift.
- The VALMET 504 suits road haulage better on this data: 20% (5.0 km/h / 3.1 mph) more top speed.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 570 V/E | 504 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 33.7 kW (45.2 hp)Traktorenlexikon, “Fiat 570 VE/570 VE/DT” | 34.0 kW (45.6 hp)Traktorenlexikon, “Valmet 504” | EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 570 V/E and the 504. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 570 V/E and the 504. |
| Which pumps more oil for implements? | 24.6 L/min (6.5 gpm)Traktorenlexikon, “Fiat 570 VE/570 VE/DT” | 27.0 L/min (7.1 gpm)Traktorenlexikon, “Valmet 504” | EvenEven on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which lifts more on the three-point hitch? | 2,000 kg (4,409 lb)Traktorenlexikon, “Fiat 570 VE/570 VE/DT” | 1,795 kg (3,957 lb)Traktorenlexikon, “Valmet 504” | AheadThe Fiat 570 V/E has 11% more lift (205 kg / 452 lb) than the VALMET 504 (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 1,960 kg (4,321 lb)Traktorenlexikon, “Fiat 570 VE/570 VE/DT” | 2,690 kg (5,930 lb)Traktorenlexikon, “Valmet 504” | Ahead (a fact, not an advantage)The VALMET 504 is 37% heavier (730 kg / 1,609 lb) than the Fiat 570 V/E (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | — | No figureNo call on maximum permissible mass: no figure on record for the 570 V/E and the 504. |
| Which has the wider choice of gears? | 8 to 16Traktorenlexikon, “Fiat 570 VE/570 VE/DT” | 6Traktorenlexikon, “Valmet 504” | AheadThe Fiat 570 V/E has 33% more forward gears (2 gears) than the VALMET 504 (both forward gears, as stated by the source). |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 570 V/E and the 504. |
| Which is faster on the road? | 25 km/h (15.5 mph)Traktorenlexikon, “Fiat 570 VE/570 VE/DT” | 30 km/h (18.6 mph)Traktorenlexikon, “Valmet 504” | AheadThe VALMET 504 has 20% more top speed (5.0 km/h / 3.1 mph) than the Fiat 570 V/E (both top speed forward, as stated by the source). |
| Which offers more PTO speeds? | 540 rpmTraktorenlexikon, “Fiat 570 VE/570 VE/DT” | 540 rpmTraktorenlexikon, “Valmet 504” | EvenEven on PTO speeds: the same speeds (540 rpm). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Fiat 570 VE/570 VE/DT” | — | No figureNo call on PTO independence: not stated for the 504. |
| Which drives on both axles? | Two-wheel or four-wheel driveTraktorenlexikon, “Fiat 570 VE/570 VE/DT” | 2WDTraktorenlexikon, “Valmet 504” | AheadThe Fiat 570 V/E is available with four-wheel drive; the VALMET 504 is two-wheel drive (as stated by the sources). |
| Which is newer, and what about parts? | 1978–1982 | 1982–1985 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Fiat 570 V/E has 11% more lift (205 kg / 452 lb) than the VALMET 504 (both lift at the hitch ends, as stated by the source).
- The VALMET 504 is 37% heavier (730 kg / 1,609 lb) than the Fiat 570 V/E (both unladen weight, as stated by the source).
- The Fiat 570 V/E has 33% more forward gears (2 gears) than the VALMET 504 (both forward gears, as stated by the source).
- The VALMET 504 has 20% more top speed (5.0 km/h / 3.1 mph) than the Fiat 570 V/E (both top speed forward, as stated by the source).
- The Fiat 570 V/E is available with four-wheel drive; the VALMET 504 is two-wheel drive (as stated by the sources).
- Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
- Even on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on PTO speeds: the same speeds (540 rpm).
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources