Fiat 566 (DT) vs John Deere 1140 (A)

9 material differences · fewer than 12

Tractor one

1982–1986

No measured PTO figure

Tractor two

1979–1986

No measured PTO figure

Which should you choose?

Read our verdict on the 566 (DT) and the 1140 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 4 fields identical or within 5%, which is not counted as material

Fiat 566 (DT) and John Deere 1140 (A), field by field
Field	566 (DT)	1140 (A)	Gap
Engine
Engine power, claimed claimed	57.3 hp	55.3 hp	—
Engine declared	FIAT-IVECO 8035.04.376	—	—
Displacement declared	2.75 L	—	—
Maximum torque declared	148 lb·ft · 200 N·m	136 lb·ft · 185 N·m	+8% 566 (DT)
Transmission
Top speed declared	15.5–18.6 mph · 25–30 km/h	15.5–18.6 mph · 25–30 km/h	—
Clutch declared	—	pedal-operated driving clutch	—
Hydraulics & hitch
Hydraulic centre declared	—	Closed centre	—
Pump flow declared	—	12.4 gpm · 47.0 L/min	—
Pressure declared	3,336–3,481 psi · 230–240 bar	2,466 psi · 170 bar	differs
Three-point lift at ends declared	5,732 lb · 2,600 kg	5,291 lb · 2,400 kg	+8% 566 (DT)
Rear PTO speeds declared	540 rpm	540 rpm	—
Weight & dimensions
Unladen weight declared	5,247 lb · 2,380 kg	5,589 lb · 2,535 kg	+7% 1140 (A)
Maximum permissible mass declared	—	8,818 lb · 4,000 kg	—
Wheelbase declared	85.6 in · 2,175 mm	80.7 in · 2,050 mm	+6% 566 (DT)
Length declared	127.9 in · 3,249 mm	138.0 in · 3,505 mm	+8% 1140 (A)
Width declared	75.6 in · 1,920 mm	81.1 in · 2,060 mm	+7% 1140 (A)
Height declared	94.1 in · 2,390 mm	95.3 in · 2,420 mm	—
Ground clearance declared	20.7 in · 525 mm	24.4 in · 621 mm	+18% 1140 (A)
Turning radius, braked declared	11.8 ft · 3.60 m	—	—
Fuel tank declared	77.1 qt · 73.0 L	82.4 qt · 78.0 L	+7% 1140 (A)

Source

Source