2 material differences · fewer than 12
Tractor oneFiat 550 (DT)1968–1978No measured PTO figureTractor twoSOMECA 550 (DT)1968–1971No measured PTO figure
Which should you choose?
Read our verdict on the 550 (DT) and the 550 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
2 material differences · 15 fields identical or within 5%, which is not counted as material
| Field | 550 (DT) | 550 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 51.2 hp | 51.2 hp | — |
| Engine declared | FIAT-IVECO 8045 | O.M.-FIAT 854.000 or A 1.000 | differs |
| Displacement declared | 3.12 L | 3.12 L | — |
| Maximum torque declared | 137 lb·ft · 186 N·m | 137 lb·ft · 186 N·m | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 14.9 mph · 24 km/h | — |
| Clutch declared | Dry FEREDO double clutch with separate PTO control | pedal-operated dry Feredo two-stage double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 5.8 gpm · 21.8 L/min | 5.8 gpm · 21.8 L/min | — |
| Pressure declared | 2,843 psi · 196 bar | 2,843 psi · 196 bar | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 4,542 lb · 2,060 kg | 4,542 lb · 2,060 kg | — |
| Wheelbase declared | 81.5 in · 2,070 mm | 81.5 in · 2,070 mm | — |
| Length declared | 135.0 in · 3,430 mm | 135.0 in · 3,430 mm | — |
| Width declared | 66.5–95.3 in · 1,690–2,420 mm | 66.5–95.3 in · 1,690–2,420 mm | — |
| Height, over the exhaust declared | 71.5 in · 1,815 mm | 71.5 in · 1,815 mm | — |
| Ground clearance declared | 16.5 in · 420 mm | 16.5 in · 420 mm | — |
| Turning radius, braked declared | 10.3 ft · 3.13 m | 10.3 ft · 3.13 m | — |
| Fuel tank declared | 57.1 qt · 54.0 L | 57.1 qt · 54.0 L | — |
Fiat 550 (DT) sources
Source
- Source: Traktorenlexikon, “Fiat 550/550 DT”
SOMECA 550 (DT) sources
Source
- Source: Traktorenlexikon, “Someca 550”