Fiat 550 (DT) vs Hürlimann H-350 (A)

7 material differences · fewer than 12

Tractor one

1968–1978

No measured PTO figure

Tractor two

1982–1986

No measured PTO figure

Which should you choose?

Read our verdict on the 550 (DT) and the H-350 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

7 material differences · 8 fields identical or within 5%, which is not counted as material

Fiat 550 (DT) and Hürlimann H-350 (A), field by field
Field	550 (DT)	H-350 (A)	Gap
Engine
Engine power, claimed claimed	51.2 hp	51.2 hp	—
Engine declared	FIAT-IVECO 8045	SAME 983-L	differs
Displacement declared	3.12 L	2.72 L	+15% 550 (DT)
Maximum torque declared	137 lb·ft · 186 N·m	141 lb·ft · 191 N·m	—
Transmission
Top speed declared	15.5 mph · 25 km/h	15.5 mph · 25 km/h	—
Clutch declared	Dry FEREDO double clutch with separate PTO control	Dry double clutch	differs
Hydraulics & hitch
Pump flow declared	5.8 gpm · 21.8 L/min	—	—
Pressure declared	2,843 psi · 196 bar	—	—
Three-point lift at ends declared	4,012 lb · 1,820 kg	5,313 lb · 2,410 kg	+32% H-350 (A)
Rear PTO speeds declared	540 rpm	540 rpm	—
Weight & dimensions
Unladen weight declared	4,542 lb · 2,060 kg	4,365 lb · 1,980 kg	—
Wheelbase declared	81.5 in · 2,070 mm	79.1 in · 2,010 mm	—
Length declared	135.0 in · 3,430 mm	140.6 in · 3,570 mm	—
Width declared	66.5 in · 1,690 mm	70.9 in · 1,800 mm	+7% H-350 (A)
Height declared	71.5 in · 1,815 mm	85.8 in · 2,180 mm	+20% H-350 (A)
Ground clearance declared	16.5 in · 420 mm	11.8 in · 300 mm	+40% 550 (DT)
Turning radius, braked declared	10.3 ft · 3.13 m	—	—
Fuel tank declared	57.1 qt · 54.0 L	57.1 qt · 54.0 L	—

Source

Source