Fiat 55-86 F (F/DT) or Steyr 955 (a)?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 55-86 F (F/DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 955 (a) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Steyr 955 (a) suits loader and hydraulic implement work better on this data: 14% (5.8 L/min / 1.5 gpm) more hydraulic flow.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Fiat 55-86 F (F/DT) and Steyr 955 (a), with the call on each
Question55-86 F (F/DT)955 (a)Call
Which puts more power through the PTO shaft?40.4 kW (54.2 hp)Traktorenlexikon, “Fiatagri 55-86 F/55-86 F/DT”40.5 kW (54.3 hp)Traktorenlexikon, “Steyr 955”Not comparableNot comparable on power at the PTO shaft: the 55-86 F (F/DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 955 (a) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the 55-86 F (F/DT) and the 955 (a).
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the 55-86 F (F/DT) and the 955 (a).
Which pumps more oil for implements?40.0 L/min (10.6 gpm)Traktorenlexikon, “Fiatagri 55-86 F/55-86 F/DT”45.8 L/min (12.1 gpm)Traktorenlexikon, “Steyr 955”AheadThe Steyr 955 (a) has 14% more hydraulic flow (5.8 L/min / 1.5 gpm) than the Fiat 55-86 F (F/DT) (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?2,375 kg (5,236 lb)Traktorenlexikon, “Fiatagri 55-86 F/55-86 F/DT”2,320 kg (5,115 lb)Traktorenlexikon, “Steyr 955”EvenEven on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
Which is heavier, for traction?1,907 kg (4,204 lb)Traktorenlexikon, “Fiatagri 55-86 F/55-86 F/DT”2,745 kg (6,052 lb)Traktorenlexikon, “Steyr 955”Ahead (a fact, not an advantage)The Steyr 955 (a) is 44% heavier (838 kg / 1,847 lb) than the Fiat 55-86 F (F/DT) (both unladen weight, as stated by the source).
Which may carry more ballast and load?—4,500 kg (9,921 lb)Traktorenlexikon, “Steyr 955”No figureNo call on maximum permissible mass: no figure on record for the 55-86 F (F/DT).
Which has the wider choice of gears?12 to 20Traktorenlexikon, “Fiatagri 55-86 F/55-86 F/DT”16Traktorenlexikon, “Steyr 955”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the 55-86 F (F/DT) and the 955 (a).
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Fiatagri 55-86 F/55-86 F/DT”30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Steyr 955”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540 rpmTraktorenlexikon, “Fiatagri 55-86 F/55-86 F/DT”540/1000 rpmTraktorenlexikon, “Steyr 955”AheadThe Steyr 955 (a) offers 1000 rpm at the PTO, which the Fiat 55-86 F (F/DT) does not (as stated by the sources).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Fiatagri 55-86 F/55-86 F/DT”—No figureNo call on PTO independence: not stated for the 955 (a).
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Fiatagri 55-86 F/55-86 F/DT”Two-wheel or four-wheel driveTraktorenlexikon, “Steyr 955”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1992–20001992–1997EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Steyr 955 (a) has 14% more hydraulic flow (5.8 L/min / 1.5 gpm) than the Fiat 55-86 F (F/DT) (both pump flow, as stated by the source).
  • The Steyr 955 (a) is 44% heavier (838 kg / 1,847 lb) than the Fiat 55-86 F (F/DT) (both unladen weight, as stated by the source).
  • The Steyr 955 (a) offers 1000 rpm at the PTO, which the Fiat 55-86 F (F/DT) does not (as stated by the sources).
  • Even on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the 55-86 F (F/DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 955 (a) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources