13 material differences

Tractor oneFiat 55-86 F (F/DT)1992–2000No measured PTO figureTractor twoHürlimann H-56 XA2005–2014No measured PTO figure

Which should you choose?

Read our verdict on the 55-86 F (F/DT) and the H-56 XA → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

13 material differences · 2 fields identical or within 5%, which is not counted as material

Fiat 55-86 F (F/DT) and Hürlimann H-56 XA, field by field
Field55-86 F (F/DT)H-56 XAGap
Engine
Engine power, claimed claimed54.2 hp54.2 hp—
Engine declaredFIAT-IVECO 8035.06.222 (323)Hürlimann 1000.3 Wdiffers
Displacement declared2.71 L3.00 L+11% H-56 XA
Maximum torque declared—177 lb·ft · 240 N·m—
Transmission
Top speed declared18.6–24.9 mph · 30–40 km/h24.9 mph · 40 km/hdiffers
Clutch declaredDry LuK double clutchElectro-hydraulically operated, powershift wet SDF multi-disc clutchdiffers
Hydraulics & hitch
Hydraulic control declared—Load sensing—
Pump flow declared10.6 gpm · 40.0 L/min8.4 gpm · 31.9 L/min+25% 55-86 F (F/DT)
Pressure declared2,698 psi · 186 bar3,046 psi · 210 bar+13% H-56 XA
Three-point lift, at the coupling points declared5,236 lb · 2,375 kg6,614 lb · 3,000 kg+26% H-56 XA
Rear PTO speeds declared540 rpm540 rpm / 1000 rpmdiffers
Weight & dimensions
Unladen weight declared4,204 lb · 1,907 kg5,622 lb · 2,550 kg+34% H-56 XA
Maximum permissible mass declared—11,023 lb · 5,000 kg—
Wheelbase declared72.6 in · 1,844 mm80.9 in · 2,056 mm+11% H-56 XA
Length declared128.9 in · 3,275 mm134.1 in · 3,405 mm—
Width declared60.6 in · 1,540 mm75.6–91.3 in · 1,920–2,320 mmdiffers
Ground clearance declared14.6 in · 372 mm16.1 in · 410 mm+10% H-56 XA
Fuel tank declared47.6 qt · 45.0 L95.1 qt · 90.0 L+100% H-56 XA

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Fiat 55-86 F (F/DT) sources

Source
  • Source: Traktorenlexikon, “Fiatagri 55-86 F/55-86 F/DT”
  • Source: Traktorenlexikon, “Fiatagri 55-86 V/55-86 V/DT”

Hürlimann H-56 XA sources

Source
  • Source: Traktorenlexikon, “Hürlimann XA 56”