13 material differences

Tractor oneFiat 55-66 S (DT)1992–1995No measured PTO figureTractor twoRenault Ceres 65/II1994–1998No measured PTO figure

Which should you choose?

Read our verdict on the 55-66 S (DT) and the Ceres 65/II → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 4 fields identical or within 5%, which is not counted as material

Fiat 55-66 S (DT) and Renault Ceres 65/II, field by field
Field	55-66 S (DT)	Ceres 65/II	Gap
Engine
Engine power, claimed claimed	54.3 hp	54.3 hp	—
Engine declared	FIAT-IVECO 8035.06	JOHN DEERE 4039 DRT 65	differs
Displacement declared	2.71 L	2.94 L	+8% Ceres 65/II
Maximum torque declared	130 lb·ft · 176 N·m	134 lb·ft · 182 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Dry OMG or LuK double clutch	Dry LuK double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Hydraulic control declared	—	Constant flow	—
Pump flow declared	9.1 gpm · 34.5 L/min	13.8 gpm · 52.3 L/min	+52% Ceres 65/II
Pressure declared	3,118 psi · 215 bar	—	—
Three-point lift, at the coupling points declared	6,614 lb · 3,000 kg	6,327 lb · 2,870 kg	—
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	5,809 lb · 2,635 kg	6,305 lb · 2,860 kg	+9% Ceres 65/II
Maximum permissible mass declared	8,488 lb · 3,850 kg	11,244 lb · 5,100 kg	+32% Ceres 65/II
Wheelbase declared	78.7 in · 1,999 mm	89.7 in · 2,279 mm	+14% Ceres 65/II
Length declared	127.6 in · 3,241 mm	148.5 in · 3,771 mm	+16% Ceres 65/II
Width declared	60.6–84.3 in · 1,540–2,140 mm	73.9–85.7 in · 1,878–2,178 mm	differs
Height, over the cab declared	89.4 in · 2,270 mm	96.3 in · 2,445 mm	+8% Ceres 65/II
Ground clearance declared	18.1 in · 460 mm	15.4 in · 390 mm	+18% 55-66 S (DT)
Fuel tank declared	77.1 qt · 73.0 L	121.5 qt · 115.0 L	+58% Ceres 65/II

Source

Source