Fiat 55-66 (DT) or SAME Condor 55 (DT)?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 55-66 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Condor 55 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Fiat 55-66 (DT) suits loader and hydraulic implement work better on this data: 37% (8.8 L/min / 2.3 gpm) more hydraulic flow.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Fiat 55-66 (DT) and SAME Condor 55 (DT), with the call on each
Question55-66 (DT)Condor 55 (DT)Call
Which puts more power through the PTO shaft?40.5 kW (54.3 hp)Traktorenlexikon, “Fiat 55-66/55-66 DT”40.5 kW (54.3 hp)Traktorenlexikon, “SAME Condor 55 (DT)”Not comparableNot comparable on power at the PTO shaft: the 55-66 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Condor 55 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the 55-66 (DT) and the Condor 55 (DT).
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the 55-66 (DT) and the Condor 55 (DT).
Which pumps more oil for implements?32.8 L/min (8.7 gpm)Traktorenlexikon, “Fiat 55-66/55-66 DT”24.0 L/min (6.3 gpm)Traktorenlexikon, “SAME Condor 55 (DT)”AheadThe Fiat 55-66 (DT) has 37% more hydraulic flow (8.8 L/min / 2.3 gpm) than the SAME Condor 55 (DT) (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?2,260 kg (4,982 lb)Traktorenlexikon, “Fiat 55-66/55-66 DT”1,580 kg (3,483 lb)Traktorenlexikon, “SAME Condor 55 (DT)”Not comparableNot comparable on three-point lift: the 55-66 (DT): lift 610 mm behind the hitch ends, as stated by the source (Traktorenlexikon, “Fiat 55-66/55-66 DT”); the Condor 55 (DT): lift through the full range at the hitch ends, as stated by the source (Traktorenlexikon, “SAME Condor 55 (DT)”) — not the same quantity, basis and condition.
Which is heavier, for traction?2,255 kg (4,971 lb)Traktorenlexikon, “Fiat 55-66/55-66 DT”1,980 kg (4,365 lb)Traktorenlexikon, “SAME Condor 55 (DT)”Ahead (a fact, not an advantage)The Fiat 55-66 (DT) is 14% heavier (275 kg / 606 lb) than the SAME Condor 55 (DT) (both unladen weight, as stated by the source).
Which may carry more ballast and load?4,200 kg (9,259 lb)Traktorenlexikon, “Fiat 55-66/55-66 DT”—No figureNo call on maximum permissible mass: no figure on record for the Condor 55 (DT).
Which has the wider choice of gears?12 to 20Traktorenlexikon, “Fiat 55-66/55-66 DT”8 to 14Traktorenlexikon, “SAME Condor 55 (DT)”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the 55-66 (DT) and the Condor 55 (DT).
Which is faster on the road?25 km/h (15.5 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Fiat 55-66/55-66 DT”25 km/h (15.5 mph) to 30 km/h (18.6 mph)Traktorenlexikon, “SAME Condor 55 (DT)”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Fiat 55-66/55-66 DT”540 rpmTraktorenlexikon, “SAME Condor 55 (DT)”AheadThe Fiat 55-66 (DT) offers 1000 rpm at the PTO, which the SAME Condor 55 (DT) does not (as stated by the sources).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Fiat 55-66/55-66 DT”independentTraktorenlexikon, “SAME Condor 55 (DT)”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Fiat 55-66/55-66 DT”Two-wheel or four-wheel driveTraktorenlexikon, “SAME Condor 55 (DT)”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1985–19921982–1983EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Fiat 55-66 (DT) has 37% more hydraulic flow (8.8 L/min / 2.3 gpm) than the SAME Condor 55 (DT) (both pump flow, as stated by the source).
  • The Fiat 55-66 (DT) is 14% heavier (275 kg / 606 lb) than the SAME Condor 55 (DT) (both unladen weight, as stated by the source).
  • The Fiat 55-66 (DT) offers 1000 rpm at the PTO, which the SAME Condor 55 (DT) does not (as stated by the sources).
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the 55-66 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Condor 55 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • Not comparable on three-point lift: the 55-66 (DT): lift 610 mm behind the hitch ends, as stated by the source (Traktorenlexikon, “Fiat 55-66/55-66 DT”); the Condor 55 (DT): lift through the full range at the hitch ends, as stated by the source (Traktorenlexikon, “SAME Condor 55 (DT)”) — not the same quantity, basis and condition.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources