Fiat 55-56 LM (DT) or New Holland TN 55 D/S (A)?
Which should you choose?
On performance, every comparable figure that differs favours the New Holland TN 55 D/S (A): hydraulic flow and three-point lift. It is also ahead on forward gears and PTO speeds.
- The New Holland TN 55 D/S (A) suits PTO-driven implements (mowers, balers, pumps) better on this data: offers 1000 rpm.
- The New Holland TN 55 D/S (A) suits loader and hydraulic implement work better on this data: 45% (14.6 L/min / 3.9 gpm) more hydraulic flow and 53% (925 kg / 2,039 lb) more three-point lift.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 55-56 LM (DT) | TN 55 D/S (A) | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 32.1 kW (43.0 hp)Traktorenlexikon, “Fiatagri 55-56 LM (DT)” | 31.8 kW (42.6 hp)Traktorenlexikon, “New Holland TN55 D/S” | EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 55-56 LM (DT) and the TN 55 D/S (A). |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 55-56 LM (DT) and the TN 55 D/S (A). |
| Which pumps more oil for implements? | 32.8 L/min (8.7 gpm)Traktorenlexikon, “Fiatagri 55-56 LM (DT)” | 47.4 L/min (12.5 gpm)Traktorenlexikon, “New Holland TN55 D/S” | AheadThe New Holland TN 55 D/S (A) has 45% more hydraulic flow (14.6 L/min / 3.9 gpm) than the Fiat 55-56 LM (DT) (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 1,745 kg (3,847 lb)Traktorenlexikon, “Fiatagri 55-56 LM (DT)” | 2,670 kg (5,886 lb)Traktorenlexikon, “New Holland TN55 D/S” | AheadThe New Holland TN 55 D/S (A) has 53% more lift (925 kg / 2,039 lb) than the Fiat 55-56 LM (DT) (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 2,140 kg (4,718 lb)Traktorenlexikon, “Fiatagri 55-56 LM (DT)” | 3,010 kg (6,636 lb)Traktorenlexikon, “New Holland TN55 D/S” | Ahead (a fact, not an advantage)The New Holland TN 55 D/S (A) is 41% heavier (870 kg / 1,918 lb) than the Fiat 55-56 LM (DT) (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | 4,000 kg (8,818 lb)Traktorenlexikon, “New Holland TN55 D/S” | No figureNo call on maximum permissible mass: no figure on record for the 55-56 LM (DT). |
| Which has the wider choice of gears? | 8 to 12Traktorenlexikon, “Fiatagri 55-56 LM (DT)” | 16 to 44Traktorenlexikon, “New Holland TN55 D/S” | AheadThe New Holland TN 55 D/S (A) has 33% more forward gears (4 gears) than the Fiat 55-56 LM (DT) (both forward gears, as stated by the source). |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 55-56 LM (DT) and the TN 55 D/S (A). |
| Which is faster on the road? | 25 km/h (15.5 mph) to 30 km/h (18.6 mph)Traktorenlexikon, “Fiatagri 55-56 LM (DT)” | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “New Holland TN55 D/S” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540 rpmTraktorenlexikon, “Fiatagri 55-56 LM (DT)” | 540/1000 rpmTraktorenlexikon, “New Holland TN55 D/S” | AheadThe New Holland TN 55 D/S (A) offers 1000 rpm at the PTO, which the Fiat 55-56 LM (DT) does not (as stated by the sources). |
| Which PTO runs independently of the ground drive? | — | independentTraktorenlexikon, “New Holland TN55 D/S” | No figureNo call on PTO independence: not stated for the 55-56 LM (DT). |
| Which drives on both axles? | Two-wheel or four-wheel driveTraktorenlexikon, “Fiatagri 55-56 LM (DT)” | 2WD / 4WDTraktorenlexikon, “New Holland TN55 D/S” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1988– | 1999–2003 | Ahead (a fact, not an advantage)The New Holland TN 55 D/S (A) is newer: production began 11 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The New Holland TN 55 D/S (A) has 45% more hydraulic flow (14.6 L/min / 3.9 gpm) than the Fiat 55-56 LM (DT) (both pump flow, as stated by the source).
- The New Holland TN 55 D/S (A) has 53% more lift (925 kg / 2,039 lb) than the Fiat 55-56 LM (DT) (both lift at the hitch ends, as stated by the source).
- The New Holland TN 55 D/S (A) is 41% heavier (870 kg / 1,918 lb) than the Fiat 55-56 LM (DT) (both unladen weight, as stated by the source).
- The New Holland TN 55 D/S (A) has 33% more forward gears (4 gears) than the Fiat 55-56 LM (DT) (both forward gears, as stated by the source).
- The New Holland TN 55 D/S (A) offers 1000 rpm at the PTO, which the Fiat 55-56 LM (DT) does not (as stated by the sources).
- The New Holland TN 55 D/S (A) is newer: production began 11 years later. We hold no parts-availability data, so there is no call on parts.
- Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on drive: every machine is available with four-wheel drive.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources