Fiat 55-56 LM (DT) vs Landini TL 33 N/A (R 5530 F)

11 material differences · fewer than 12

Tractor one

from 1988

No measured PTO figure

Tractor two

1983–1987

No measured PTO figure

Which should you choose?

Read our verdict on the 55-56 LM (DT) and the TL 33 N/A (R 5530 F) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 5 fields identical or within 5%, which is not counted as material

Fiat 55-56 LM (DT) and Landini TL 33 N/A (R 5530 F), field by field
Field	55-56 LM (DT)	TL 33 N/A (R 5530 F)	Gap
Engine
Engine power, claimed claimed	54.2 hp	47.3 hp	+14% 55-56 LM (DT)
Engine declared	Fiat 8035.06.206 or 307	Perkins AD 3.152 S	differs
Displacement declared	2.71 L	2.50 L	+8% 55-56 LM (DT)
Maximum torque declared	128 lb·ft · 173 N·m	130 lb·ft · 176 N·m	—
Transmission
Top speed declared	15.5–18.6 mph · 25–30 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Dry LuK or Valeo double clutch	Dry Luk double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	8.7 gpm · 32.8 L/min	9.8 gpm · 37.1 L/min	+13% TL 33 N/A (R 5530 F)
Pressure declared	3,046 psi · 210 bar	—	—
Three-point lift at ends declared	3,847 lb · 1,745 kg	3,600 lb · 1,633 kg	+7% 55-56 LM (DT)
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	4,718 lb · 2,140 kg	4,200 lb · 1,905 kg	+12% 55-56 LM (DT)
Wheelbase declared	80.8 in · 2,052 mm	77.0 in · 1,955 mm	—
Length declared	137.0 in · 3,480 mm	131.1 in · 3,330 mm	—
Width declared	67.7 in · 1,720 mm	52.3 in · 1,328 mm	+30% 55-56 LM (DT)
Height declared	93.3 in · 2,370 mm	91.7 in · 2,330 mm	—
Ground clearance declared	17.7 in · 450 mm	12.7 in · 323 mm	+39% 55-56 LM (DT)
Turning radius, braked declared	10.6 ft · 3.23 m	10.3 ft · 3.15 m	—
Fuel tank declared	63.4 qt · 60.0 L	56.0 qt · 53.0 L	+13% 55-56 LM (DT)

Source

Source